GTX 980 Ti Help!

[Cfc_90]

So this graphics card has Supplementary Power Connectors of 6 pin and 8 pin.
Do I need to connect both of those pins? My psu does have a wire with a 8 pin and 6 pin connector. (Or do I just connect the 8 pin).

PS: Sorry this may be a stupid question, first time builder here

 

[GanXteR]

You will need both...

 

[doubletake]

Just want to point out that there's no need to waste time asking others; the instructional card that comes in the package tells you what you need to know, such as the fact that you NEED both power connectors.

 

[Cfc_90]

Ok thanks, now my psu came with multiple VGA wires. Should i use 2 wires 1 which connects to the 8 pin and 1 to the 6 pin. Or should i use only 1 wire which has both the 8 pin and 6 pin and connect that to the 2.

 

[Derza10]

I assume you have a PSU with multiple 12v rails, you will want to put one on each rail if you can- assuming that is what you mean. What is your PSU make/model?

 

[Cfc_90]

I assume you have a PSU with multiple 12v rails, you will want to put one on each rail if you can- assuming that is what you mean. What is your PSU make/model?

I have an EVGA 850w gold. Just a little confused with the graphics card. As the PSU came with multiple VGA wires (assuming for SLI). But as im only using 1 graphics card should I connect only 1 VGA wire to the 8 pin and 6 pin (As they have both connections available). Or should i use 2 VGA connection and connect 1 to the 8 pin and another to the 6 pin.

 

[Cfc_90]

Btw I way 4 cables that connect the PSU to the graphics card (GTX 980 Ti, which has a 8 pin and 6 pin), each cable has one 6 pin and one 8 pin (6 + 2). My question is do I use only 1 cable to connect to the graphics card. Or should I use 2 (1 for the 8 pin and 1 for the 6)

 

[geofelt]

It matters not which power leads you use.
Connect one of the 6 pin leads and one of the 6+2 pin leads.

 

[Cfc_90]

It matters not which power leads you use.
Connect one of the 6 pin leads and one of the 6+2 pin leads.

So I should use 2 cables then. 1 for each pin

 

[geofelt]

It matters not which power leads you use.
Connect one of the 6 pin leads and one of the 6+2 pin leads.

So I should use 2 cables then. 1 for each pin

Yes.
The psu is modular; you put one end of a cable into the psu and the other end into the GTX980ti.
You do this twice. Once for the 8 pin graphics port, and the second for the 6 pin port.
The cards needs both a 6 and a 8 pin power cable.
Do not force anything, parts fit only one way.

 

[Cfc_90]

It matters not which power leads you use.
Connect one of the 6 pin leads and one of the 6+2 pin leads.

So I should use 2 cables then. 1 for each pin

Yes.
The psu is modular; you put one end of a cable into the psu and the other end into the GTX980ti.
You do this twice. Once for the 8 pin graphics port, and the second for the 6 pin port.
The cards needs both a 6 and a 8 pin power cable.
Do not force anything, parts fit only one way.

Ok now if 1 cable has both a 6 pin and an 8 pin should I use this instead?

 

[tiny voices]

That will be perfectly fine^

That is how it is intended to go.