GUYs i need your opinions in this.

hasson94

Honorable
Apr 27, 2015
40
0
10,530
Haswell 4.0GHz - i7-4790K 8M/LGA1150
Thermaltake AF0056 Longevity 12 Blue 12CM Case Fan
Asus Z97-Pro Gamer (LGA1150)
Kingston HyperX Fury Blue Series 16GB (2 x 8GB) 240-Pin DDR3 1866 Desktop Memory Model HX318C10FK2/16
SAMSUNG 850 EVO MZ-N5E250BW M.2 250GB SATA 6Gbps Solid State Drive
1TB WD10EZEX 7200RPM SATAIII 64MB
Cooler Master N300 NSE-300-KKN2 Mid Tower ATX Dual USB3.0
PNY Quadro K2200 4GB DDR5 $585.00
LG GH24NSB0-24X DVDRW - Dual Layer SATA Black
Corsair CMPSU-VS450 450W PSU

THIS IS SUPPOSED TO BE MY FIRST BUILD,I NEED THIS FOR 3D MODELING AND RENDERING ON SEVERAL SOFTWARE,THE ADVISOR STATED THAT THIS MOTHERBOARD DOESNT SUPPORT THE M.2 AS A BOOT DEVICE

I HONESTLY DON'T NEED THE M.2 AND NOT EVEN ANY SSD,
BE MY GUESTS AND MODIFY THIS CONFIG.NOTE THAT XEON'S ARE HARD TO FIND OVER HERE.
THANKS IN ADVANCE
 


HEY,thanks for that advice,I APPRECIATE your contribution,but note that i live in lebanon,middle east and we don't expect the skylake before years.
 
For what you are doing the build looks very good. Good job on getting workstation GPU and not a gaming one.

Might double check on power requirements for that GPU.

Cooler Master is not my choice in cases, but being in middle east that might be the most practical option you have.

Since you got the overclockable cpu I assume you mean to overclock it, in which case you need an aftermarket cooler. A popular good cooler is the Cooler Master hyper 212 evo.