H.D.D and Power LED not working?

[Remixxeh]

I've looked at my motherboard and case manual and plugged them in the right pins but when I plug in my H.D.D plug in a different spot my Reset switch lights up. But my power button doesn't when I add the power led after.

 

[Ironsounds]

Hello... Switch the polarity of your Non-working connections on the MB.

 

[Remixxeh]

Hello... Switch the polarity of your Non-working connections on the MB.

I have

 

[Ironsounds]

Hello... interesting... is this a new product/case you bought?

 

[Remixxeh]

Hello... interesting... is this a new product/case you bought?

Yes, it's a DeepCool Dukase V2

 

[Ironsounds]

Hello... I would test one connection/LED at a time at this point... and see if one of the other LEDS have failed or shorted wiring... and causing the problem with the other ones... you wanna try that for me? B /

 

[Remixxeh]

Hello... I would test one connection/LED at a time at this point... and see if one of the other LEDS have failed or shorted wiring... and causing the problem with the other ones... you wanna try that for me? B /

By itself and when the power led in plugged in the H.D.D led in pin 1 and 2 the reset led turns on

 

[Ironsounds]

Hello... OK good test... LED's are pretty tuff devices... I would say it is possible that you have some mis wiring to the Switches/buttons/LED's at the front of your case... Do you wanna proceed to look there for any obvious problems, mis labeled, wrong Connections or there is always a phone call to the Maker of it, for their advice? B /

 

[Remixxeh]

Hello... OK good test... LED's are pretty tuff devices... I would say it is possible that you have some mis wiring to the Switches/buttons/LED's at the front of your case... Do you wanna proceed to look there for any obvious problems, mis labeled, wrong Connections or there is always a phone call to the Maker of it, for their advice? B /

I could in the future but for now I might leave them off but thank you for you time