h100i and h110 in zalman z11 case

[osamaalkhalaileh]

Is it possible to fit the h100i or h110 in the zalman z11 case. I just want a yes or no please. If it doesnt then ill just go air cooling

 

[austing]

Is it possible to fit the h100i or h110 in the zalman z11 case. I just want a yes or no please. If it doesnt then ill just go air cooling

Its only possible it you pop the top fins off and have the fans mounted up top ouside of the case, with the radiator on the inside.

You can also grab a dremmel and cut the bays out of the front and mount the radiator vertically.

or you can cut another hole in the bottom of the case next to the pre-existing one and mount in on the bottom of the case (you would have to remove the harddrive bays)

Otherwise I'd just do what I did and grab an H80 or a new case :3

 

[gamingboy]

I wouldn't even mess with water coolers. Just get a Noctua NH-D14.

 

[osamaalkhalaileh]

I wouldn't even mess with water coolers. Just get a Noctua NH-D14.

Phanteks PH-TC14PE is that a good heatsink as well?

 

[austing]

I wouldn't even mess with water coolers. Just get a Noctua NH-D14.

Phanteks PH-TC14PE is that a good heatsink as well?

Yes, its dual tower so its good some beefy cooling.

 

[griptwister]

Meh... go with a air cooler. Like gamingboy suggested. That one you want to get is also a good cooler IMO, I have a H50 and I kind of feel that I could have bought a better air cooler for the same price.

 

[austing]

I have a Corsair H60 in my Zalman Z11 with two Noctua F12 PWM's, it works fine at 4.5Ghz