Half ram turn on

Sep 27, 2018
27
0
30
0
Not on the compability list but it shows 16 gb as I said sometimes,if the compability I can buy a new set but what if I have the same problem?
They are not the same pack but same model I bought second one 3 months later
 

13thmonkey

Titan
Moderator
Sticks from different packs are not guaranteed to work together.

Does each stick work on it's own?

Try all combinations of stick positions? i.e. stick 1 socket 1, stick 2 socket 2 and stick 2 socket 1, stick 1 socket 2. for all sockets.
 

13thmonkey

Titan
Moderator
Are you aware of ram subtimings? with each stick check in the bios, and write down each of the timings, and ram voltages. I'm expecting that there will be a difference somewhere.

What I think is happening is that the reseat forces the timings to be reassessed, so you might end up having to set them manually, maybe loosen them a little bit, but setting them manually might be needed
 

13thmonkey

Titan
Moderator
So you can try setting it to manual and not auto, and setting each setting to what it is when one stick works. This would prevent it from automatically collecting and causing a problem. Long shot. If that fails increase each number by 1 or increase voltage by the smallest increment, +0.005V or similar .
 
make sure the mb bios is up to date may be a bios issue. on the ram are all 4 dimms one sidded or two?? if there mixed you can get that issue. if it an intel cpu run the intel cpu test make sure the memory controller passes.
 
Sep 27, 2018
27
0
30
0
R5 1600
gtx 1070
Corsair vs650
Corsair 2x8gb 2400 CMK8GX4M1A2400C16R
Asus b350 plus prime

Bios the latest version how can I test memory controller?
 
Sep 27, 2018
27
0
30
0
Yes there are some difference in dram cas latency when it shows 8gb i.e. Trdwr is 10 for cha,31 for chb there are 7 difference like this when it shows 16 gb all the values are the same
 
Sep 27, 2018
27
0
30
0
Tried didn't work,I swap the rams also the same(Trdwr is 10 for cha,31 for chb and the other 7 values not the same ).Is it the ram slot B2 the problem?
 
Sep 27, 2018
27
0
30
0
Last night I tried 1 ram in b2 slot, but it didnt work.Fans and lights were running(or working I dont know which is correct),but nothing on the screen
 

13thmonkey

Titan
Moderator


So you might have a dead slot, try the other pair of slots.
 

ASK THE COMMUNITY

TRENDING THREADS