[SOLVED] Hard disk drive failure

[cmorr2485]

Built a new PC about 2 weeks ago. Have a nvme drive for boot and ssd for storage. Getting the message when booting saying replace drive imminent failure. I ran a CMD test , Properties test , Crystal Disk info test & Manufacturers software tests on both drives. All come back 100 percent health for both drives. PC runs fine after I exit the Bios. Any idea why I am getting this message ?

 

[rgd1101]

fresh os install 2 weeks ago?

 

[cmorr2485]

fresh os install 2 weeks ago?

Yes it was a fresh install

 

[Bob.B]

Yes it was a fresh install

Did you install the latest bios and drivers after the OS install?
Run this and post a link.
PC Benchmark

 

[cmorr2485]

Did you install the latest bios and drivers after the OS install?
Run this and post a link.
PC Benchmark

UserBenchmarks: Game 53%, Desk 92%, Work 46%
CPU: Intel Core i3-10100 - 86.3%
GPU: AMD RX 580 - 54.8%
SSD: Spcc M.2 PCIe SSD 256GB - 170.2%
SSD: Samsung 860 Evo 500GB - 115.1%
RAM: Crucial BL8G32C16U4B.M8FE 2x8GB - 84.2%
MBD: Asus TUF GAMING H470-PRO (WI-FI)

 

[Bob.B]

UserBenchmarks: Game 53%, Desk 92%, Work 46%
CPU: Intel Core i3-10100 - 86.3%
GPU: AMD RX 580 - 54.8%
SSD: Spcc M.2 PCIe SSD 256GB - 170.2%
SSD: Samsung 860 Evo 500GB - 115.1%
RAM: Crucial BL8G32C16U4B.M8FE 2x8GB - 84.2%
MBD: Asus TUF GAMING H470-PRO (WI-FI)

Post a screen shot of what crystal disk info shows for each disk.

 

[cmorr2485]

Post a screen shot of what crystal disk info shows for each disk.

https://imgur.com/kcjsgx3

View: https://imgur.com/kcjsgx3

https://imgur.com/PNuCUDY

View: https://imgur.com/PNuCUDY

 

[Bob.B]

https://imgur.com/kcjsgx3

View: https://imgur.com/kcjsgx3

https://imgur.com/PNuCUDY

View: https://imgur.com/PNuCUDY

If the error message shows up when you boot, unplug the sata ssd and boot the machine.

Does the error message still show?

 

[cmorr2485]

If the error message shows up when you boot, unplug the sata ssd and boot the machine.

Does the error message still show?

Ok so I did that the message didn't show , but when I reconnected the SSD the message didn't show it booted fine so could it of been one of cables wasn't all the way connected maybe ?

 

[Bob.B]

Ok so I did that the message didn't show , but when I reconnected the SSD the message didn't show it booted fine so could it of been one of cables wasn't all the way connected maybe ?

Could be........just keep using the machine and see if the msg comes back.