Hard to find driver

[scout_03]

hi eveyone
try to find he folowing driver for network control the board is GS7610 Ultra (v1.1c)and the chipset is (Realtek RTL8201CL 10/100 Mbps Fast Ethernet PHY).try on realtek nothing,install the lan driver from ecs nothing work.repairing for a friend.
any help would be welcome.thanks

scout_03

 

[ko888]

When the ECS GS7610 ULTRA (V1.1C) is connected to a LAN do either of the RJ-45 LAN port's LEDs flash or light up? Have you tried a different UTP LAN cable?

No device driver is required for determining if the RJ-45 LAN port is active or dead. If the RJ-45 LAN port is dead no driver is going to make it work and your friend will have to get a PCI LAN card.

 

[scout_03]

to ko888
thank for the reply ,but when i install the ecs lan driver receive code 10 .no light on rj-45 connector.i had to reformat because he try microsoft security essentiel and the machine frezee on windows.salutations scout_03

 

[scout_03]

(Solve) by using a extension card and went on tout les drivers.com and use my config to test .got new driver with another number and card work fine.
to mod mark topic solve thanks

 

[scout_03]

my last post on this was the best answer

 

[Proximon]

Best answer selected by Proximon.

 

[Proximon]

You can't have your own best answer, especially when it's not terribly clear. You did get good advice however.