Question Have 6000Mhz RAM memory but Pc only use 4800MHZ

[Gonzoyd]

Best regards, recently got a new PC with:
Motherboard: Gigabyte Z790 Gaming AX X
Graphic card: MSI geforce 4070 gaming trio
RAM: Corsair vengance 16gbx2 - 6000MHZ
Processor: Intel core I513400F

The thing is that my PC is only using 4800MHZ of speed , tried activating XMP profile and also 5800MHZ speed from the BIOS and PC restart but don't show nothing on screen, after a while PC restart again and get into Bios with a message that there was an issue and the option to change bios to default and boot or reboot. What can i do? Or sadly I have to work only with 4800?

 

[Dragos Manea]

Update bios to latest revision, it can give you better memory support

 

[Misgar]

Are the two DIMMs inserted in the sockets recommended in the motherboard manual?

Is your RAM in the motherboard QVL?

 

[Gonzoyd]

Update bios to latest revision, it can give you better memory support

Hello Dragos is already updated.

 

[Dragos Manea]

Then it seems you had bad luck with your CPU (the memory controller is in the CPU) from what i know on Asus boards you have 2 profiles, try selecting Profile II (the second one)

 

[Gonzoyd]

Are the two DIMMs inserted in the sockets recommended in the motherboard manual?

Is your RAM in the motherboard QVL?

Best regards Misgar, Yes A2 and B2 as recommended and didn't know about the QVL, but don't understand it, my RAM reference is CORSAIR VENGEANCE DDR5 RAM 32GB (2X16) CMK32GX5M2D6000C36. The QVL list is here: https://www.gigabyte.com/Motherboard/Z790-GAMING-X-AX-rev-1x/support#support-memsup

 

[Zerk2012]

Best regards Misgar, Yes A2 and B2 as recommended and didn't know about the QVL, but don't understand it, my RAM reference is CORSAIR VENGEANCE DDR5 RAM 32GB (2X16) CMK32GX5M2D6000C36. The QVL list is here: https://www.gigabyte.com/Motherboard/Z790-GAMING-X-AX-rev-1x/support#support-memsup

Set XMP then manually change the speed to 5600.

 

[Gonzoyd]

Set XMP then manually change the speed to 5600.

Which options should i change?

https://imgur.com/a/ZekBqJJ

View: https://imgur.com/a/ZekBqJJ

 

[Zerk2012]

Which options should i change?

https://imgur.com/a/ZekBqJJ

View: https://imgur.com/a/ZekBqJJ

Should be set XMP from the main bios page go to advanced memory options and change it from 6000 to 5600, save and exit.

Edit system memory Multiplier