Having boot problems

keithhouseworth

Prominent
Sep 18, 2017
23
0
510
Hey guys,
I just finished building in an evolv itx case- i5 8600k, asus z370i, asus strix 1070, 3200 16gb dom plats.
When I power up the system the only thing that happens is the mobo LEDs come on, no post code beeps, no display, no fans or anything, just the LEDs. I’ve tried 3 different power supplies, and tried a single stick of 2400 ram. Any ideas?
 
Solution
look at the last 4 digitis of the mb serial number this is the bios rev of the mb. check with the mb vendor if the default bios will post with your cpu. if it does check that the standoffs are used so the mb not shorting to to case. with asus io shields make sure the shield in right and not shorting the mb out. if they look fine and there no post. pull the mb use just onboard video and one ram stick see if it posts on top of the mb box. if not check that the cpu is in right and locked down. also check for bent pins under the cpu.
look at the last 4 digitis of the mb serial number this is the bios rev of the mb. check with the mb vendor if the default bios will post with your cpu. if it does check that the standoffs are used so the mb not shorting to to case. with asus io shields make sure the shield in right and not shorting the mb out. if they look fine and there no post. pull the mb use just onboard video and one ram stick see if it posts on top of the mb box. if not check that the cpu is in right and locked down. also check for bent pins under the cpu.
 
  • Like
Reactions: rt_lobo
Solution