Question Having constant Blue Screens

Ya Boyo Goyo

Prominent
Dec 8, 2019
6
1
515
0
Hey,

I'm having an issue where I am getting random BSOD's and I can't seem to reproduce them, they just come at random intervals , but they all seem to have one thing in common when searching them up which is Driver Issues.

I have had 6 different BSOD's I will list the errors out here:
IRQL_NOT_LESS_THAN_EQUAL
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
PAGE_FAULT_IN_NONPAGED_AREA
DRIVER_IRQL_NOT_LESS_THAN_EQUAL
SYSTEM_SERVICE_EXCEPTION
KERNEL_SECURITY_CHECK_FAILURE
and one that said that the DXGMMS2.sys had corrupted or something.

I had changed my cpu, motherboard and RAM prior to these errors occurring, but that was about 3 months ago and I have only been receiving these BSOD's for about a week, So I don't know if these two are related or not since I was changing from Intel to AMD without a clean format of WIN10.

I just wanted to see if there is anything I could do to try fix it before I have format.

Things I have tried:
Deleting Old Intel Graphics Drivers
sfc /scannow (this apparently resolved some errors, but I'm still getting BSOD's)
Updating Graphics Drivers


System Specs (New)
Cpu: AMD Ryzen 2600x
Mobo: Asus Strix x570E Gaming
Ram: 2x8GB Corsair Dominator 3600mhz
Gpu: Gigabyte G1 GTX 980Ti
Ssd1: 500GB Samsung 970 evo m.2 Nvme SSD
Ssd2: 500GB Samsung 970 evo plus m.2 Nvme SSD
Hdd1: 1TB WD Blue
Hdd2: 4TB Firecuda pro
Psu: Corsair hx850i

System Specs (OLD)
Cpu: Intel I7 7700k
Mobo: Asus Strix Z270F
Ram: 2x8GB Corsair LPX
Gpu: Gigabyte G1 GTX 980Ti
Ssd1: 500GB Samsung 970 evo m.2 Nvme SSD
Ssd2: 500GB Samsung 970 evo plus m.2 Nvme SSD
Hdd1: 1TB WD Blue
Hdd2: 4TB Firecuda pro
Psu: Corsair hx850i
 
Reactions: BadaBopBoom
Hey,

I'm having an issue where I am getting random BSOD's and I can't seem to reproduce them, they just come at random intervals , but they all seem to have one thing in common when searching them up which is Driver Issues.

I have had 6 different BSOD's I will list the errors out here:
IRQL_NOT_LESS_THAN_EQUAL
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
PAGE_FAULT_IN_NONPAGED_AREA
DRIVER_IRQL_NOT_LESS_THAN_EQUAL
SYSTEM_SERVICE_EXCEPTION
KERNEL_SECURITY_CHECK_FAILURE
and one that said that the DXGMMS2.sys had corrupted or something.

I had changed my cpu, motherboard and RAM prior to these errors occurring, but that was about 3 months ago and I have only been receiving these BSOD's for about a week, So I don't know if these two are related or not since I was changing from Intel to AMD without a clean format of WIN10.

I just wanted to see if there is anything I could do to try fix it before I have format.

Things I have tried:
Deleting Old Intel Graphics Drivers
sfc /scannow (this apparently resolved some errors, but I'm still getting BSOD's)
Updating Graphics Drivers


System Specs (New)
Cpu: AMD Ryzen 2600x
Mobo: Asus Strix x570E Gaming
Ram: 2x8GB Corsair Dominator 3600mhz
Gpu: Gigabyte G1 GTX 980Ti
Ssd1: 500GB Samsung 970 evo m.2 Nvme SSD
Ssd2: 500GB Samsung 970 evo plus m.2 Nvme SSD
Hdd1: 1TB WD Blue
Hdd2: 4TB Firecuda pro
Psu: Corsair hx850i

System Specs (OLD)
Cpu: Intel I7 7700k
Mobo: Asus Strix Z270F
Ram: 2x8GB Corsair LPX
Gpu: Gigabyte G1 GTX 980Ti
Ssd1: 500GB Samsung 970 evo m.2 Nvme SSD
Ssd2: 500GB Samsung 970 evo plus m.2 Nvme SSD
Hdd1: 1TB WD Blue
Hdd2: 4TB Firecuda pro
Psu: Corsair hx850i
when getting the new system did you do a bios update?
and did you install all drivers from the asus website? in the process removing the old mobo drivers from the drive you used?
 

Ya Boyo Goyo

Prominent
Dec 8, 2019
6
1
515
0
when getting the new system did you do a bios update?
and did you install all drivers from the asus website? in the process removing the old mobo drivers from the drive you used?
No I haven't tried updating the BIOS yet as I haven't received my 5900x, but I installed all the drivers from the Asus website and the only drive I could find is the intel graphics one, is there a way of finding/removing the other drivers?

Should I update the BIOS before I get the new CPU?
 

ASK THE COMMUNITY

TRENDING THREADS