Having issue with burning the disc.

[Zaselim]

Hello everyone,
So i am trying to burn an audio cd, but after burning is complete successfully the tray comes out. When i put the disc in again it shows the empty disc and when i try it burns again but still shows empty.
I try to write the disc as a data disc but still get the same issue. 3rd time i checked the verify data option and after the burning is done and the verification begins it gives me an error "the request couldn't be performed because of an I/O device error.
I also tried burning the dvd-r but still same issue.
I checked the retail dics(movies,audio) and also checked my previously burned disc and all of them working fine.
The writing part is not working.

 

[Paul NZ]

And what are you using to burn whatever to it?

 

[Zaselim]

I used power iso, i tried windows media player to burn the audio cd as well.

 

[Paul NZ]

If its giving an I/O error try another sata cable or another sata port

 

[Zaselim]

I did actually, have two more ports and cables. Guess i try them as well.

 

[Zaselim]

No, getting same error on different ports with other two sata cables as well.
Can there be a compatibility issue with the sata cable and motherboard? The thing is i am using the sata cables from my quad core q6600 ddr3 system to my i7 6700k ddr4 system.

 

[Paul NZ]

Try this then. https://cdburnerxp.se/en/download

Get the download without Installcore

And what blanks are you using? I wouldnt use rewritables

 

[smorizio]

did you do a clean install of windows if not you have too to install the right sata chipset drivers for your cd rom to work right.

 

[Zaselim]

Didnt work with the cd burner xp.
It was working fine last time i used it. I just installed a new hdd a couple of months ago and didnt had the extra sata so i used the one connected with the writer. Now today i wanted to burn an audio cd so i took out the sata cables from my old system which i am not using and attached to the board and the rom. I even attached the sata on the same sata slot where the rom was connected originally.

Yes i am using cdr not the cdrw

The error Cd burner xp gave me was this " the burning process has been completed, but the verification of the burned data failed. The data on the disc might be unusable."

I confused, the readable part of the burner is working fine, if there was a driver or cable issue wouldn't i be having the issue with the reading as well and i tried on 7 different discs (dvd-r/cd-r both) so the issue is not with the discs either.