Question Having to deselect and reselect A-XMP Profile 1

[TacoRat]

Bios automatically loads before starting windows and I have to deselect and reselect A-XMP Profile 1. How do I fix this?

Whenever I start up my computer from being shut down, without me doing anything it automatically loads into my bios where I find that only my HDD is showing up while my boot drive doesn't, which is an M.2 drive and it won't load windows until the bios finds that drive. So far the workaround I found that works is to deselect the A-XMP Profile 1, then when it restarts and loads into the bios I select it again and then it restarts and is able to find the M.2 drive and it loads windows without entering the bios. This is a new pc I just built so I'm just trying to work out the kinks but other than this it works fine.

 

[Lutfij]

Welcome to the forums, newcomer!

When posting a thread of troubleshooting nature, it's customary to include your full system's specs. Please list your specs like so;
CPU:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:

as for your platform, check and see what your OS version is and the BIOS version for your motherboard. Include the age of the PSU as well. Are you working with an ASRock motherboard? If so, manually input the timings, frequency and voltage for your am(kit) into the BIOS and see if the issue is resolved.

 

[TacoRat]

CPU: Ryzen 5 5600x
Motherboard: MSI MAG B550 Tomahawk
Ram: Corsair Vengeance LPX DDR4 2x8 GB 3600MHz
NVMe SSD: WD BLUE SN550 1TB M.2 2280 - Up to 2,400 MB/s
HDD: Seagate Barracuda Compute 2 TB 3.5" 7200RPM
GPU: Gigabyte Eagle RTX 3070ti
PSU: Corsair RM 750x - Bought new a few months ago
Case: Fractal Meshify C
OS: Windows 10 Home Version 10.0.19043 Build 19043
Bios version: E7C91AMS.A81