HDD 160 gig problem

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Installed new drive as slave and it was detected when pc booted.Also
appeared in device manager.
I shutdown the computer down but when It restarted it keeps telling me
there is a problem with my
hard drive and pc will not boot until I disconnect this large drive.Any
ideas pls.
I am running XP Pro on AMD computer.

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Primary drive = master or cable select
Secondary drive = slave or cable select

If you only had one drive before, and it is a Western Digital, it is
jumpered for "single" or cable select. Change it! Or, jumper the second
drive as cable select to match the primary drive.

--

Regards:

Richard Urban

aka Crusty (-: Old B@stard


"spud 2" <foods@eircom.net> wrote in message
news:k0Hpd.42681$Z14.18230@news.indigo.ie...
> Installed new drive as slave and it was detected when pc booted.Also
> appeared in device manager.
> I shutdown the computer down but when It restarted it keeps telling me
> there is a problem with my
> hard drive and pc will not boot until I disconnect this large drive.Any
> ideas pls.
> I am running XP Pro on AMD computer.
>
>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Did you have it jumper as slave..? Did you partition and format the
drive...? Does you bios support 48 bit LBA and is it enabled.?

"spud 2" <foods@eircom.net> wrote in message
news:k0Hpd.42681$Z14.18230@news.indigo.ie...
> Installed new drive as slave and it was detected when pc booted.Also
> appeared in device manager.
> I shutdown the computer down but when It restarted it keeps telling me
> there is a problem with my
> hard drive and pc will not boot until I disconnect this large drive.Any
> ideas pls.
> I am running XP Pro on AMD computer.
>
>

 

[john]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Didn't get a chance to format it because of the mentioned probs.Tried the
jumpers in every permutation
since but still the same problem.

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Maybe it died? Maybe the connectors aren't well seated? Try reconnecting
them, or trying in in a different machine, or take it to the store and
replace it.

spud 2 wrote:

> Installed new drive as slave and it was detected when pc booted.Also
> appeared in device manager.
> I shutdown the computer down but when It restarted it keeps telling me
> there is a problem with my
> hard drive and pc will not boot until I disconnect this large drive.Any
> ideas pls.
> I am running XP Pro on AMD computer.
>
>
>