[SOLVED] HDD Caddy Problem

[tmryldz]

Hi all,
I put the original HDD into the caddy and the SSD into the spot the HDD was. I cloned my HDD to SSD and I can boot from SSD without any problem. I erased all partition in the HDD and created D drive for storage with MiniTool Partition Wizard. But there is a little problem when computer shuts down. It is almost to shut down but suddenly the HDD is starting to work and after 5-10 seconds the computer can be shut down succesfully. If I restart the computer, I'm hearing a sizzle from the HDD and taking a blue screen that mentions shutting down unproperly. I wonder the reason of 5-10 seconds delay while shutting down and also the sizzle from HDD and blue screen while restarting.
I want to say that I checked the HDD with HD Tune Pro and results (benchmark, health and error scan) seem normal.

 

[Grobe]

Which cloning tool did you use - and what method ?

How was the HDD partitioned before, and what is the capacity for HDD and ssd ?

 

[tmryldz]

I have Samsung 860 EVO SSD 500 GB so I used Samsung Data Migration software.

HDD has 750 GB capacity and it was partitioned two parts (C and D). there were totally 300 GB files in it.

 

[Grobe]

The HDD is bigger than the SSD, so you might have created a defective file table if the tool doesn't take account for smaler drive.

 

[tmryldz]

The HDD is bigger than the SSD, so you might have created a defective file table if the tool doesn't take account for smaler drive.

Can clean installation of Windows 10 solve the problem?

 

[Grobe]

Can clean installation of Windows 10 solve the problem?

If the clone process is the root cause, then yes - reinstall Windows should solve the issues.