Hdd does not formatting(New setup)

[brkyzdmr]

MSI Z170a Pro Gaming Motherboard
MSI GTX 1060 6GB GPU
I5 6600 CPU
Corsair 80+ 650W PSU
8 GB DDR4 RAM
WD 1 TB HDD

When i turn on the system, EZ Debug VGA light is lighting and system very slow booted and when i open the Windows 10 format screen from USB, its very slow loading and when i partition the disk, setup is stopping and not give an error. When i remove the hdd, EZ Debug lights not lighting and system normal booting to BIOS. All cables in right places. I try millions ways but not working. How can i solve this? Thanks.

 

[D_Know_WD]

Hi there brkyzdmr,

That is really unpleasant.

My suggestion would be to attach your HDD with different cables to another SATA port.

In case the issue persists, I would advise you to attach the drive to another computer, as a secondary one. That way, you will see if there's something wrong with your system or the drive itself. Once you've done that, you can run both short and extended DLG tests on it: http://products.wdc.com/support/kb.ashx?id=j7aePm

In case the issue persists or the drive fails the tests, you can contact the place you got the drive from or our Support and eventually RMA it: http://products.wdc.com/support/kb.ashx?id=8lQMu4

Let me know how this goes,
D_Know_WD

 

[brkyzdmr]

Thanks for helping. I thought about it, but I don't have a computer to do it. Is there a any other ways to do this?

 

[D_Know_WD]

Can you at least attach the drive with different cables to another SATA port?
As you can't attach the drive to another computer, you can use WD's DLG tool for DOS mode. You will need a to create a bootable USB: http://products.wdc.com/support/kb.ashx?id=6d09tR

D_Know_WD

 

[brkyzdmr]

I tried 3 different cables but still i have same problem. I can try to bootable flash. Thanks.