[SOLVED] HDD Mount in MB511

Toggle sidebar Toggle sidebar
Solution
delaro
This question was ignored simply because the way the new Forum design is, the mobile version is annoying to navigate and you get to deal with big ads, the desktop version has unanswered questions less obvious and the forum now is completely separate from the main site. :( You get far less browsing now because you have to make the extra effort to find it.

I would lose a Fan and apply a Stacking bracket but I would move the bracket further down closer to the end of that PSU cover.

Here is an example of a usable bracket, this one is on the fancy side but there are many other options...
Sort by date Sort by votes
USAFRet

USAFRet

Titan
Moderator
Mar 16, 2013
171,314
17,828
184,590
Your case has only 2 mounts for a 3.5" drive.

  1. Replace one of the 3.5" drives with a 2.5" something.
  2. "important daily stuff I work on " absolutely needs a good backup routine. No matter what drive it is on, or how that drive is attached to the case.
 
Upvote 0 Downvote
B

brighthulk

Dec 7, 2018
17
0
10
Okay Sir, I also noticed the picture from your signature shows about the importance of data backup ..which most of people fail to do...Currently I do backup data once a week...will make it regular from now.. Sorry for my english, it's not my mother tongue

please excuse any errors on my part
 
Upvote 0 Downvote
USAFRet

USAFRet

Titan
Moderator
Mar 16, 2013
171,314
17,828
184,590
brighthulk said:
Okay Sir, I also noticed the picture from your signature shows about the importance of data backup ..which most of people fail to do...Currently I do backup data once a week...will make it regular from now.. Sorry for my english, it's not my mother tongue

please excuse any errors on my part
Click to expand...
'Once a week' is far far far better than most people.
Kudos to you!

(and your english is fine)
 
  • Like
Reactions: brighthulk
Upvote 1 Downvote
delaro

delaro

Judicious
Ambassador
Aug 23, 2011
4,428
250
33,740
This question was ignored simply because the way the new Forum design is, the mobile version is annoying to navigate and you get to deal with big ads, the desktop version has unanswered questions less obvious and the forum now is completely separate from the main site. :( You get far less browsing now because you have to make the extra effort to find it.

I would lose a Fan and apply a Stacking bracket but I would move the bracket further down closer to the end of that PSU cover.

Here is an example of a usable bracket, this one is on the fancy side but there are many other options.
https://eshop.macsales.com/item/OWC...uTQQbJgkH1zefBaQSZQaAhCCEALw_wcB&gclsrc=aw.ds

No screws holes that far? No problem Double-sided tape will hold it down and provide a bit of anti-shock..
https://www.amazon.com/Gorilla-Heav...argid=aud-801381245258:pla-311820756231&psc=1

or a bit ugly but doesn't require you to stick the hard drive itself to the Cover, also impairs air flow.
https://www.ebay.com/i/401782557945...jv9GjD92ZsFiGzKTzlhyS3bJZP2WdRyYaArmoEALw_wcB

0b701ae943fed5e84fa94583dc1f3bd6-full.jpg
 
Last edited:
Upvote 1 Downvote
Solution
B

brighthulk

Dec 7, 2018
17
0
10
Thank you for the links @delaro ...I have a pair of these 3.5 to 5.25 mounting kit that were used on my old case.

https://www.amazon.in/Segolike-Mounting-Adapter-Bracket-Holder/dp/B074QNJTFG

Currently used one of them to mount the hdd as shown in op ... i'm thinking about taking drive out and placing it horizontal by sticking a double sided tape to the cover as I have inked on this image. Will that be ok ?

https://imgur.com/fesNdqf
View: https://imgur.com/fesNdqf


the other option is going to be getting a new 2.5 drive as mentioned by @USAFRet

just trying to explore all possible options as ssd's are costly in my country.. thank you :) ..
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom