Question HDMI issue on A520I AC motherboard and Ryzen 5 5600G ?

Nov 7, 2021
4
0
10
0
Attempted to build a new budget rig and still in the test bench stage, I can only get an image to appear using the Display Port to get into the BIOS. Both HDMI ports don't produce any video at all. Windows is not installed yet.

I updated the BIOS to F14 and even the latest one possibly a beta because it didn't work with the F14 version either. Tried two different hdmi cables and both hdmi inputs on my monitor which I use everyday so I know they work fine.

Tried clearing CMOS, and tried with ssd removed and with one ram stick at a time.

Went into the BIOS and played around with the integrated graphics settings but no luck getting hdmi to work.

Another thing I noticed when it says "No boot device detected and to insert bootable media and press any key" if I press ctrl-alt-delete the computer will no longer respond to any keyboard input and has to be powered down by the power button

I connected a speaker to the motherboard and it does one single beep stating everything is fine so it appears it gets past the POST but does not produce a signal via hdmi.

Any ideas? Faulty board?
 
Last edited:
Attempted to build a new budget rig and still in the test bench stage, I can only get an image to appear using the Display Port to get into the BIOS. Both HDMI ports don't produce any video at all. Windows is not installed yet.

I updated the BIOS to F14 and even the latest one possibly a beta because it didn't work with the F14 version either. Tried two different hdmi cables and both hdmi inputs on my monitor which I use everyday so I know they work fine.

Tried clearing CMOS, and tried with ssd removed and with one ram stick at a time.

Went into the BIOS and played around with the integrated graphics settings but no luck getting hdmi to work.

Another thing I noticed when it says "No boot device detected and to insert bootable media and press any key" if I press ctrl-alt-delete the computer will no longer respond to any keyboard input and has to be powered down by the power button

I connected a speaker to the motherboard and it does one single beep stating everything is fine so it appears it gets past the POST but does not produce a signal via hdmi.

Any ideas? Faulty board?
Probably not faulty since you can see BIOS screen. Install windows and GPU drivers will take care of output signal.
 
Nov 7, 2021
4
0
10
0
Probably not faulty since you can see BIOS screen. Install windows and GPU drivers will take care of output signal.
Now what if I didn't have a display port cable. Seems kinda absurd that you will be forced to have a particular cable just to see get a video signal.

I'm waiting on a replacement and will see what happens and try installing windows if it happens again
 

ASK THE COMMUNITY

TRENDING THREADS