Heating problems with the "Presshot"

jndietz

Distinguished
Dec 26, 2004
6
0
18,510
Well, I got a new PC for Christmas, ABIT AS8 with P4 2.8. I'm using the stock HS/F that they gave me. It's running at about 53C idle (average) and 75C (or more) under load. I talked to Jay and Crashman in IRC for about an hour and they had some good suggestions on cooling solutions:

<A HREF="http://www.tomshardware.com/cpu/20041213/index.html" target="_new">Zalman CNPS7700</A>

and

<A HREF="http://www.newegg.com/app/ViewProductDesc.asp?description=35-106-044&depa=0" target="_new">Thermaltake Tower112</A>

Both seem to be a lot better cooling solution than what I am running right now (Intel stock—remember?). However, if any of you guys out there have any other suggestions, feel free to post! This thing is just getting too hott!

I like to use the internet once in a while.
 

peteroy

Distinguished
BANNED
Jun 14, 2004
280
0
18,790
The Intel Stock cooler has a sufficient heatsink to cool the Prescott, not using it will void your warranty.

Intel has made a support page with recommended type of cases for the 90nm and 3Ghz CPU's, <A HREF="http://support.intel.com/support/processors/pentium4/sb/CS-008537.htm" target="_new">Check it</A>

Those cases are good for AMD processors as well, you can find those cases in <A HREF="http://www.newegg.com/app/searchProductResult.asp?Submit=advance&Range=1&catalog=7&DEPA=0&bop=or&description=air-duct+3g&InnerCata=7" target="_new">Newegg too</A>

And as much as heatsink is important, it is also important to have a good case that has a good airflow, otherwise even the best heatsink fan will blow hot hair on the heatsink and not really do any good.

<A HREF="http://www.clancas.net" target="_new">clan CHAOS</A>
 

jammydodger

Distinguished
Sep 12, 2001
2,416
0
19,780
not using it will void your warranty.
Apparently with intel CPU's using an after market cooling solution does not void your warrenty. This is only for AMD CPU's.
It is true that you need good airflow in your case, but the actual case itself wont make a whole lot of difference. Prescott CPU's are simply waaaay too hot.
 

RichPLS

Champion
Pete, considering you moderate a tech forum, why did think that your warranty is void using an aftermarket cooler with Intel chips???

<pre><font color=red>°¤o,¸¸¸,o¤°`°¤o \\// o¤°`°¤o,¸¸¸,o¤°
And the sign says "You got to have a membership card to get inside" Huh
So I got me a pen and paper And I made up my own little sign</pre><p></font color=red>
 

peteroy

Distinguished
BANNED
Jun 14, 2004
280
0
18,790
I think I read it somewhere and I believe a person should be aware of that before he use 3rd party cooler, just so there will be no surprises later.

<A HREF="http://www.clancas.net" target="_new">clan CHAOS</A>
 

RichPLS

Champion
There is no need to be aware of false rumors...
It is OK and Intels warranty is still valid whether you use stock or 3rd party coolers.


<pre><font color=red>°¤o,¸¸¸,o¤°`°¤o \\// o¤°`°¤o,¸¸¸,o¤°
And the sign says "You got to have a membership card to get inside" Huh
So I got me a pen and paper And I made up my own little sign</pre><p></font color=red>
 

Cybercraig

Distinguished
Dec 31, 2007
2,058
0
19,780
That's quite true. Intel CPUs are so reliable in general I'm not sure it's possible to hurt one. They'll just slow down when they get too hot. Masterful engineering!

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot
 

peteroy

Distinguished
BANNED
Jun 14, 2004
280
0
18,790
Then I stand corrected, I just believe in general that anyone should be aware of all the elements before making any kind of decision in computers.

<A HREF="http://www.clancas.net" target="_new">clan CHAOS</A>
 

phial

Splendid
Oct 29, 2002
6,757
0
25,780
Intel CPUs' arent any more reliable than the competitions. And the competitions doenst have to slow down, because they dont reach 70+Celcius ;)

-------
<A HREF="http://www.albinoblacksheep.com/flash/you.html" target="_new">please dont click here! </A>
 

Cybercraig

Distinguished
Dec 31, 2007
2,058
0
19,780
ROFLMAO! Good ole' Prescotts. A blunder of unimaginable proportions! :lol:

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot
 

phial

Splendid
Oct 29, 2002
6,757
0
25,780
OH I misread your post, I thought you were actuallly serious :D

-------
<A HREF="http://www.albinoblacksheep.com/flash/you.html" target="_new">please dont click here! </A>
 

fiveiron

Distinguished
Sep 25, 2004
89
0
18,630
Keep in Mind abit motherboards will almost always report temperatures too high, I would say take 8 Degrees off what its reading then you will have an accurate reading.
 

endyen

Splendid
And I will say Abit boards are way more accurate than most other Intel chipset boards. I have used an IR temp sensor, and Abit boards tend to be more correct, more often, than Intel boards, Asus boards, and MSI boards.
 

Cyrus

Distinguished
Apr 17, 2004
192
0
18,680
Actually there's still a use of the Prescott high temperature, it's to be a room heater. My 3.2 Prescott has just made my well ventilated 5x7 m room a few degrees celcius hotter than usual. At least that's good for me who catch a cold now. ^^
 

addiarmadar

Distinguished
May 26, 2003
2,558
0
20,780
Normally the stock intell HSF is good enough, as long as your case temps are cool enough. Those Prescotts dish our a great deal of heat and case temps a very much important to control than any other CPU. If your case temps are too high then it would be a waste of time getting a better HSF for even they need the cool air to bleed of the heat from them.

<i><font color=red>Only an overclocker can make a computer into a convectional oven.</i></font color=red>