[SOLVED] Hel me with CAS latency settings

Sep 23, 2020
34
4
45
1
Try XMP timing. For CL16 3200mhz, a good timing would be 16-18-18-38. Don't forget to adjust the voltage:)
 
Last edited:
You will need to make the necessary changes in Bios DRAM timing control and also DRAM voltage.

List your RAM P/N and I can tell you your Timings and voltage however if you look at the SPD section of CPUz, your best Timings are listed and any XMP profile your modules may have. Write these values down then transfer the timings to Bios.
 
Sep 23, 2020
34
4
45
1
Try XMP timing. For CL16 3200mhz, a good timing would be 16-18-18-38. Don't forget to adjust the voltage:)
 
Last edited:

ASK THE COMMUNITY