Hello is the ASRock H110M-DGS motherboard compatible with my Coolermaster G650M Power supply?

[Joshua_1226]

Hello,
This is the first ever computer I have ever built and everything was going well until the end. I tried to turn on the computer but it did not turn on, I asked around and many people are saying it is because my motherboard is not compatible with my power supply. Can anyone please help this is frustrating :/

Thank you!
Josh

 

[RedDubzSmash]

Compatibility isn't the issue. If it is a 24 pin it's going to work. Make sure you have your cpu power connectors and PCI power connecter connected.

 

[RedDubzSmash]

Could you post you parts please?

 

[Joshua_1226]

Could you post you parts please?

http://pcpartpicker.com/list/HGjH2R These are all the parts I have used to build my computer

Thank you very much for helping btw!

 

[RedDubzSmash]

Nice build man! Will the system not even turn on or will it turn on but not do anything?

 

[Joshua_1226]

Nice build man! Will the system not even turn on or will it turn on but not do anything?

My system won't even turn on :/ I pressed the on button and nothing happens :/

 

[RedDubzSmash]

Ok. Are all your front IO connectors connected to the motherboard?

 

[Dark Lord of Tech]

The power supply although , not great quality is 100% compatible and plenty of power for that setup.

 

[Joshua_1226]

Ok. Are all your front IO connectors connected to the motherboard?

I connected the LED lights and everything I needed that the case gave me to the motherboard but I don't know if I have to specifically find the front IO connectors and connect it to the motherboard. Should I try?

 

[RedDubzSmash]

Yes sir. Look in your motherboard manual and find the front IO configuration and try and rewire it. That is most likely your problem.

 

[RedDubzSmash]

It should be the wire with a bunch of little connectors splitting off of it.

 

[Dark Lord of Tech]

 

[Joshua_1226]

Yes sir. Look in your motherboard manual and find the front IO configuration and try and rewire it. That is most likely your problem.

It is still not working i rewired the front of the IO but it still will not turn on

 

[RedDubzSmash]

Are your 24 pin, 4 pin CPU and 6 pin GPU cables plugged in?

 

[Joshua_1226]

I tried that as well no bueno

 

[Joshua_1226]

Are your 24 pin, 4 pin CPU and 6 pin GPU cables plugged in?

My 24 pin into the motherboard is plugged in, sorry if I sound uneducated but where are my 4 pin for CPU and 6 pin GPU. I have a 8 pin that I have plugged in that is right on top of my CPU is that the 4 pin you were talking about?

 

[Dark Lord of Tech]

Yes you have an 8 pin not a 4.

 

[RedDubzSmash]

As SR stated that is correct. The 6 or 8 pin gpu plug is on the side of the gpu.

 

[Joshua_1226]

As SR stated that is correct. The 6 or 8 pin gpu plug is on the side of the gpu.

I have the Sapphire Radeon RX and it is a 8 pin side as well both plugged in

 

[RedDubzSmash]

Is the on off switch on the back of your power supply switched on?

 

[RedDubzSmash]

And make sure that the cpu plug is a 4 + 4 and not a 6 + 2 pin. The 6+2 is for Saphire.

 

[Joshua_1226]

Is the on off switch on the back of your power supply switched on?

Yes sir it is switched on

 

[Joshua_1226]

And make sure that the cpu plug is a 4 + 4 and not a 6 + 2 pin. The 6+2 is for Saphire.

My Cpu plug is straight up 8 it is not separated by 4+4 and the saphire has been connected by the 6+2

 

[RedDubzSmash]

Hmm. Is there a 4 + 4 pin coming from the power supply?

 

[Joshua_1226]

Hmm. Is there a 4 + 4 pin coming from the power supply?

Negative all the wires are either 6+2s or the one 8 pin that I plugged into the CPU