help building my pc

[esesesdr]

https://www.pccomponentes.com/configurador/F53f8cEc4

Hello i am a novice when it comes to pcbuilding, and i need help with a few questions.

I need to know if this setup will work correctly.

I dont know if the power supply i chose was good enough for the setup (not sure if it was calculated properly).

I also want to know if it will be good for 3d sculpting and modeling with maya.

Finally i would like to know if at the price point of my setup is it worth it or should i look at something else with the same price.

All feedback is helpful

Thank you for your help

 

[GamingEnthusiast420]

It also depends on if you wish to game or not.
3d modeling requires lots of cores and threads. If you don't want to do much gaming, I would scrap the 580 for a 1060 or a 480, and get a RyZen 1700.
The power supply should be enough.
As for the price, its pretty good for what your getting.

 

[elbert]

Get faster RAM as the CPU CCX works at the RAM speed. Your 2400 RAM will cause the CPU to have 9ns larger latency than with 3200 RAM. Some 2400 only works at 2133 on Ryzen so could be bad. Least get 3000 RAM that works at 2933 for about $5 more. The PSU isnt very good for gaming. I suggest getting a better quality 550W. The seasonic S12II 620W is a better PSU. If this build is for a 1080p monitor the 580 4GB is more than enough if it save you enough for better RAM and PSU.