yep.
sounds like you need the audio line.
if you look at the 3 4pin connections on your sound card there should be some printing above/below/underneath them
aux in aux out line in
or lables to that effect
you need to plug the cd audio line into the cd one.
the actuall cable is usually grey, thin, has 3 or 4 wires in the grey sheath, and has a flat black connector at each end.
and no... dont just plug in any stray plug.
if you dont have one, go buy one for a buck or two.
on the back of your cd/dvd drive there are a number of plugs pins.
going from right to left they are:
4 big fat pins for the power connector
20 odd pins for the ata cable (derr)
set of 8 pins with a jumper to determine the drives master/slave status
narrow slot for the cd audio connector.
some latter drives also have another smaller slot for digital output.
hope this helps.
I'll respect your comments & opinions, even if i disagree with them, Provided you dispay maturity.