[SOLVED] HELP: Coolermaster Fans in Liam Li Case

[LiamLiO11]

Hey guys,
Need your expertise. I have a Liam Li O11 Air case and I am currently filling the case full of fans with the Coolermaster MasterFan Pro RGB fans. There are 12 in total (3 front intake, 3 top radiator Exhaust, 3 bottom intake, and 3 side exhaust). Each MasterFan pro kit comes with three fans and their own individual controller. Here’s the link for the controller:

MasterFan Pro 120 Air Balance RGB 3 in 1 with RGB LED Controller | Cooler Master

www.coolermaster.com

My question is what is the best way to hook all of these up so I can use the software to control them. Each chained into one header, each set of three with controller off their own individual header? (If so which ones)

My motherboard is the asrock x370 Fatal1ty k4 board. Onboard plugs are (Cpu_Fan1, Cpu_Opt/W_Pump, Cha_Fan1 & Cha_Fan2, Cha_Fan3/W_Pump)

Link for motherboard:

https://www.asrock.com/mb/AMD/Fatal1ty X370 Gaming K4/index.asp

Link for O11 Air Case:

O11 Air Mid-Tower ATX Computer Case | Gaming Cabinet

Excellent airflow properties thanks to support for up to twelve 120mm fans.The result of a collaboration between Lian Li and professional overclocker der8auer, the Lian Li O11 PC-011 AIR combines exceptional air cooling properties with an elegant design and subtle features.Designed with award...

www.lian-li.com

Thanks for your help! Searched all day and all night and couldn’t find any answers.

 

[RyzenNoob]

Yes, just like iCue from Corsair, it is likely to have to be software controlled

https://coolermaster.egnyte.com/dl/bzO7pzWh6A

It's best to ask Coolermaster how to hook them all up

Though you will need a SATA power cable into the controller, and the USB header cable to put on the USB2.0 header. This way, the SATA gives it power and the USB lets the device be recognised by your motherboard and Coolermaster software. Though looking at the photo of the controller, it only has 4 RGB headers, so you would need either a splitter if that can be done without damaging the controller/motherboard, though I wouldn't recommend putting in a splitter. It's not what I've done with my Corsair RGB LED hub