Pointless and pretty stupid, but I'm bored and my old Pi wasn't seeing much use, not sure if this is even relevant or anyone here can help me. Using it as an automated CO2 brewing/gasing system. Using a CO2 cylinder, required a hose to connect all the fittings, but the fitting I got came with an incorrect size on the cylinder side. It's a standard Australian cylinder Type 30 (w21-8 I believe), however, the fitting I received was a CGA320/G1/2 (and I cannot replace the fitting with a 1/4" type 30 nut because of the way the hose is fitted)
Just asking for help to try find a Female Type 30 to Male CGA320, anything I have come across has been Female CGA320 Male Type 30 or only specifies one of the heads. This (#3) is the closest thing I have been able to find, but they haven't had the product available in a while now. Thanks for any help with this, all the other brewing forums I tried visiting for help are either archived or haven't had any activity in over 3 months (Australian forums, haven't tried international because apparently, CGA320 in America is different from here).
Nothing overly expensive if it can be helped, thanks for any help.
Just asking for help to try find a Female Type 30 to Male CGA320, anything I have come across has been Female CGA320 Male Type 30 or only specifies one of the heads. This (#3) is the closest thing I have been able to find, but they haven't had the product available in a while now. Thanks for any help with this, all the other brewing forums I tried visiting for help are either archived or haven't had any activity in over 3 months (Australian forums, haven't tried international because apparently, CGA320 in America is different from here).
Nothing overly expensive if it can be helped, thanks for any help.