Help for oc amd fx 8350

[haugabodl97]

Hey
i oced my fx 8350 on 4,4 ghz with stock voltage (just to try) works fine the first day, and after a hour of h1z1 my computer got bluescreen. Im thinking that i got to low voltage so i changed it 1,350V and 4,5 ghz. After 10 minutes in prime95 i got max temp on 54C. Does this look stable? or is to low voltage for that speed? im a oc noob.
Hope for good answers.

 

[haugabodl97]

My specs :
AMD FX 8350
GIGABYTE 970A-UD3 (F7 bios version)
CORSAIR VENGEANCE 1600 mhz 8gb
XFX r9 280x 3gb
kingston 240gb ssd
seagate 2tb hdd
corsair tx750watt
cm evo 212

 

[Wisecracker]

To not answer your question 😀 if you did not disable Turbo you are clocking a single core 4.6GHz (23x200MHz)

1.35v sounds about right. Use AMD OverDrive to determine the 'thermal margin' of you CPU ...

 

[cemerian]

go here http://www.overclock.net/f/10/amd-cpus and read the guides, also 10min of prime is no indication of stability i test at least 1 or 2h, most people will recommend 24h prime test,since for prime the load gets heavier the longer it runs, keep temps under 62c and don't go to high on voltage, back with my fx i would not go above 1,55v vcore, but raise it slowly and keep temps in check, and most importantly read the guide, it will explain everything you need to know

 

[haugabodl97]

To not answer your question 😀 if you did not disable Turbo you are clocking a single core 4.6GHz (23x200MHz)

1.35v sounds about right. Use AMD OverDrive to determine the 'thermal margin' of you CPU ...

Turbo is disable, i have disable all the things that can slow down my cpu