- Mar 5, 2017
- 1
- 0
- 510
ok so it was 3 am and i wanted to overclock. I have no experience and barely any knowledge about overclocking but I ignored everything and went for a shot at it. I only changed two thing in the bios: the ram frequency (from 3000 to 4000)
and switched something from auto to adaptive mode. what i theorise may have happened was that the frequensies i changed it to were too much and because it's in adaptive mode, it may have taken exessive energy voltage. However, my computer does turn on (everything turns on) but the monitor doesent detect anything. after a few seconds of waiting the computer restarts and tries again. I let it restart 3 times and not once did the monitor detect a thing.
Components:
Intel core i5 6600k @ 3.5 ghz
16 gb of ddr4 ram
gtx 1070 evga
cs860 m power supply
sorry for bad spelling and/or non capitals as english is not my first lenguage and im scared i toasted my computer.
and switched something from auto to adaptive mode. what i theorise may have happened was that the frequensies i changed it to were too much and because it's in adaptive mode, it may have taken exessive energy voltage. However, my computer does turn on (everything turns on) but the monitor doesent detect anything. after a few seconds of waiting the computer restarts and tries again. I let it restart 3 times and not once did the monitor detect a thing.
Components:
Intel core i5 6600k @ 3.5 ghz
16 gb of ddr4 ram
gtx 1070 evga
cs860 m power supply
sorry for bad spelling and/or non capitals as english is not my first lenguage and im scared i toasted my computer.
Facebook
Twitter
Instagram