Just installed Speedfan and I have a few questions (PC Case = Antec P182, MB = P5E-WS):
1. There are 4 fan speeds and how do I find out which ones they control? It seems like Speed02 controls both the rear fan and top fan of my case.
2. I like to keep Speed02 to 65% to reduce noise level. How do I keep this setting at startup? I did try to add Speedfan to Startup but it would start at 100% speed.
3. This application is great. Is there any documentation on this application?
4. There are my current readings at idle. Are these measurements OK? Did I connect anything wrong?
System fan 0 RPM
CPU0 fan 1480 RPM
Aux0 fan 1623 RPM
CPU1 fan 0 RPM
Aux1 fan 0 RPM
System 32c
CPU 25c
AUX 127c (high)
Core0 17c
Core1 17c
Core2 17c
Core3 17c
Core 58c (high)
Ambient 45c
Vcore 1.17V
+12V 11.25V
AVcc 3.3V
1. There are 4 fan speeds and how do I find out which ones they control? It seems like Speed02 controls both the rear fan and top fan of my case.
2. I like to keep Speed02 to 65% to reduce noise level. How do I keep this setting at startup? I did try to add Speedfan to Startup but it would start at 100% speed.
3. This application is great. Is there any documentation on this application?
4. There are my current readings at idle. Are these measurements OK? Did I connect anything wrong?
System fan 0 RPM
CPU0 fan 1480 RPM
Aux0 fan 1623 RPM
CPU1 fan 0 RPM
Aux1 fan 0 RPM
System 32c
CPU 25c
AUX 127c (high)
Core0 17c
Core1 17c
Core2 17c
Core3 17c
Core 58c (high)
Ambient 45c
Vcore 1.17V
+12V 11.25V
AVcc 3.3V