Help! Installed G.SKILL Sniper Series into asus rampage black IV, not all memory is showing up

AJRam_103

Commendable
Mar 21, 2016
4
0
1,510
HI, Ive attached some pictures because I am not the best with technical terms . I have had my PC with 32 GB of gskill sniper series ram for over a year, I decided to buy another 32gb of the identical G.SKILL Sniper Series 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000). to make a total of 64 gb. I installed the ram and when i started my computer I checked and only 48GB are showing up. I made sure the slots are clean, and I think they are installed correctly. I went to the bios page and it seems like all 8 slots are showing so im not sure what the problem could be? I dont know where to go from here help please! advance

http://i1090.photobucket.com/albums/i371/stackedu1/112.jpg
http://i1090.photobucket.com/albums/i371/stackedu1/111.jpg
 



All the 2011 chips support 64gb and 100% that board since I'm using it right now with 64gb.

I suggest you make sure that each set of 4 is in the right slots since its every other one. like A1-C1-A2-C2 / B1-D1-B2-D2. I'm not home to look at my manual, but when I had 32GB for a bit, the board really didn't like having them in the wrong slots. Not sure why only 48GB is showing up, is that in the Bios is windows?
 


the processor is an Intel Core i7-4930K CPU @ 3.40 Ghz
 
Increasing the SA Voltage could help it from crashing, but if not all the memory is showing up than I would think thats pointing to another problem... than again you are using 2133mhz which usually requires a voltage bump anyways to even run. Set them all to 1333mhz, 1.5v and see if it shows up. than you can narrow down what the problem might be.