Hello,
I ran into some difficulty trying to mount a Sony memory card reader in my Antec Nine Hundred Two case. I was able to eventually get the reader mounted in the supplied 3.5" to 5.25" adapter, but even then the reader was not flush with the front of the case; the screw holes in the adapter do not allow the drive to be aligned with the front of the case if 2 screws per side are used. Also, I was unable to get the faceplate mounted over the reader; the faceplate mounts to the case with two screws but it was not clear how to mount the faceplate since the adapter blocks the mounting holes for the faceplate when it is inserted into the bay. I can mount the faceplate but not when the adapter has been inserted. (The Antec manual gives only general instructions and wasn't of much help).
Appreciate any suggestions. Is there a better adapter available out there than the one provided with the case?
Thanks!
I ran into some difficulty trying to mount a Sony memory card reader in my Antec Nine Hundred Two case. I was able to eventually get the reader mounted in the supplied 3.5" to 5.25" adapter, but even then the reader was not flush with the front of the case; the screw holes in the adapter do not allow the drive to be aligned with the front of the case if 2 screws per side are used. Also, I was unable to get the faceplate mounted over the reader; the faceplate mounts to the case with two screws but it was not clear how to mount the faceplate since the adapter blocks the mounting holes for the faceplate when it is inserted into the bay. I can mount the faceplate but not when the adapter has been inserted. (The Antec manual gives only general instructions and wasn't of much help).
Appreciate any suggestions. Is there a better adapter available out there than the one provided with the case?
Thanks!