Hey is this the correct or good settings in bios to get my i7 920 to 3.8ghz stable?
CPU Clock Ratio ( 19X )
CPU Host Frequency (Mhz) ( 200 )
CPU Uncore Frequency (Mhz) ( 3205Mhz 16X )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )
Memory Feature
Memory Control Setting ( Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Parameters
tCL Setting ( 9 )
tRCD Setting ( 9 )
tRP Setting ( 9 )
tRAS Setting ( 24 )
tRFC Setting ( 88 )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( 1.3250 )
CPU VTT Voltage ( +150mv )
CPU PLL VCore ( Auto )
DIMM Voltage ( Auto )
DIMM DQ Vref ( +0 )
QPI PLL VCore ( 1.300V )
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )
ICH VCore ( Auto )
PWM Frequency ( 800 )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Logical Processor Setting
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Settings
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 )
Is there anything in here that screams trouble? Anything I should drop lower?
Some features that shouldn't be disable?
Please help I'm a nooby.
CPU Clock Ratio ( 19X )
CPU Host Frequency (Mhz) ( 200 )
CPU Uncore Frequency (Mhz) ( 3205Mhz 16X )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )
Memory Feature
Memory Control Setting ( Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Parameters
tCL Setting ( 9 )
tRCD Setting ( 9 )
tRP Setting ( 9 )
tRAS Setting ( 24 )
tRFC Setting ( 88 )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( 1.3250 )
CPU VTT Voltage ( +150mv )
CPU PLL VCore ( Auto )
DIMM Voltage ( Auto )
DIMM DQ Vref ( +0 )
QPI PLL VCore ( 1.300V )
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )
ICH VCore ( Auto )
PWM Frequency ( 800 )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Logical Processor Setting
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Settings
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 )
Is there anything in here that screams trouble? Anything I should drop lower?
Some features that shouldn't be disable?
Please help I'm a nooby.