Question Help just installed new cooling and CPU on bios still reads 92 degrees celsius.

[Patrick7]

We just installed the MSI Mag core liquid 240R V2 white in my sons pc, we went on the bios and it was reading 92 degrees celsius is that still normal?? we bought some much better quality thermal paste than the factory one (Corsair XTM50) and applied it but i just thought it would be less than 92 degrees celsius, everything else was 30-40 degrees celsius.

Specs:


CPU: Intel Core i5-11400F 2.6GHz (4.4GHz Turbo) 6-Core 12-Thread
GPU: NVIDIA GeForce RTX 2060 6GB
Chipset: Intel B560
RAM: 16GB (2 x 8GB) DDR4 3000MHz
SSD: Intel 660p 512GB M.2 NVMe SSD
CPU Cooler: DeepCool Gammaxx GT RGB(REPLACED WITH MSI MAG CORE LIQUID 240 R V2 WHITE)
PSU: Thermaltake 600W Gold
Case: DeepCool Macube 310 ATX Case - White
Dimension: 19.50" x 8.50" x 16.70"

 

[SkyNetRising]

Can you show a photo of your system with side panel removed?
(upload to imgur.com and post link)
Did you remove plastic film from cpu block?

View: https://youtu.be/lEJnNqPBeE4?t=33

Note. Pump for MSI Mag core liquid 240R V2 is located in radiator.
It can not be in highest point of liquid loop. You can not place radiator at top of pc case.

 

[Patrick7]

Hey so all the install videos showed it being installed up top here are the pictures

https://imgur.com/VT0rB07

View: https://imgur.com/VT0rB07

https://imgur.com/YseDxj5

View: https://imgur.com/YseDxj5

https://imgur.com/XmGz2Oc

View: https://imgur.com/XmGz2Oc

 

[Patrick7]

Can you show a photo of your system with side panel removed?
(upload to imgur.com and post link)
Did you remove plastic film from cpu block?

View: https://youtu.be/lEJnNqPBeE4?t=33

Note. Pump for MSI Mag core liquid 240R V2 is located in radiator.
It can not be in highest point of liquid loop. You can not place radiator at top of pc case.

Literally installed everything exactly like it said unlessss some of the connectors(rgb) are not where they should be and that's causing rising CPU temp? the cooling unit feels cool, nothing feels hot in there when its running so dont understand why it shows 92 degrees celsius here is a picture of what it says on BIOS

yes i removed plastic film. The other 3 fans inside are working and spinning fine as well as the 2 on the cooling unit.

https://imgur.com/piu0ZX7

View: https://imgur.com/piu0ZX7

 

[SkyNetRising]

Reinstall radiator and move it to front of pc case. Hoses connected at bottom.

BTW - ram modules should be installed in slots A2 and B2.

 

[Patrick7]

Reinstall radiator and move it to front of pc case. Hoses connected at bottom.

BTW - ram modules should be installed in slots A2 and B2.

i JUST noticed that wow...would that cause an issue???

 

[SkyNetRising]

would that cause an issue???

Improper radiator placement - yes.
That most certainly can be an issue.