I'm trying to overclock my i7 950 to 4ghz stable. I got it to 3.8ghz stable with HT on but my temps are reaching pretty high. My max temp was 81/79/78/76 degrees using Real Temp Sensor Test (prime95).
What am I doing wrong to have temps so high?
Picture below
Here is my computer specs:
i7-950
H70 Stock fans pushing air out of case.
P6X58D Premium
G Skill PI 3X2gb CL 6
EVGA GTX 470 SC
Antec 902
Antec TruePower 750W
BIOS
Ai Overclock Tuner - Manual
CPU Ratio Setting - 21
Intel (R) SpeedStep (TM) Tech - Disabled
Intel (R) Turbo Mode Tech - Enabled
BCLK Frequency - 181
PCIE Fequency - 100
DRAM Frequency - DDR3 - 1451MHz
DRAM CAS# Latency - 6 DRAM Clock
DRAM RAS# to CAS# Delay - 8 DRAM Clock
DRAM RAS# PRE Time - 6 DRAM Clock
DRAM RAS# ACT Time - 20 DRAM Clock
CPU Voltage 1.20000v
CPU PLL Voltage - Auto
QPI/DRAM Voltage - Auto
IOH Voltage - Auto
IOH PCIE Voltage - Auto
ICH Voltage - Auto
ICH Voltage - Auto
DRAM Bus Voltage - 1.64v
DRAM DATA REF Voltage on CHA - Auto
DRAM CTRL REF Voltage on CHA - Auto
DRAM DATA REF Voltage on CHB - Auto
DRAM CTRL REF Voltage on CHB - Auto
DRAM DATA REF Voltage on CHC - Auto
DRAM CTRL REF Voltage on CHC - Auto
Load-Line Calibration - Enabled
CPU Differential Amplitude - Auto
CPU Clock Skew - Auto
CPU Spread Spectrum - Auto
IOH Clock Skew - Auto
PCIE Spread Spectrum - Auto
C1E Support.................. = [Disabled]
Hardware Prefetcher.......... = [Enabled]
Adjacent Cache Line Prefetch. = [Enabled]
Intel(r) Virtualization Tech. = [Disabled]
CPU TM Function.............. = [Disabled]
Execute Disable Bit.......... = [Enabled]
Intel(r) HT Technology....... = [Enabled]
Active Processor Cores....... = [All]
A20M......................... = [Disabled]
Intel(r) SpeedStep(tm) Tech.. = [Disabled]
Intel(r) C-STATE Tech........ = [Disabled]
What am I doing wrong to have temps so high?
Picture below
Here is my computer specs:
i7-950
H70 Stock fans pushing air out of case.
P6X58D Premium
G Skill PI 3X2gb CL 6
EVGA GTX 470 SC
Antec 902
Antec TruePower 750W
BIOS
Ai Overclock Tuner - Manual
CPU Ratio Setting - 21
Intel (R) SpeedStep (TM) Tech - Disabled
Intel (R) Turbo Mode Tech - Enabled
BCLK Frequency - 181
PCIE Fequency - 100
DRAM Frequency - DDR3 - 1451MHz
DRAM CAS# Latency - 6 DRAM Clock
DRAM RAS# to CAS# Delay - 8 DRAM Clock
DRAM RAS# PRE Time - 6 DRAM Clock
DRAM RAS# ACT Time - 20 DRAM Clock
CPU Voltage 1.20000v
CPU PLL Voltage - Auto
QPI/DRAM Voltage - Auto
IOH Voltage - Auto
IOH PCIE Voltage - Auto
ICH Voltage - Auto
ICH Voltage - Auto
DRAM Bus Voltage - 1.64v
DRAM DATA REF Voltage on CHA - Auto
DRAM CTRL REF Voltage on CHA - Auto
DRAM DATA REF Voltage on CHB - Auto
DRAM CTRL REF Voltage on CHB - Auto
DRAM DATA REF Voltage on CHC - Auto
DRAM CTRL REF Voltage on CHC - Auto
Load-Line Calibration - Enabled
CPU Differential Amplitude - Auto
CPU Clock Skew - Auto
CPU Spread Spectrum - Auto
IOH Clock Skew - Auto
PCIE Spread Spectrum - Auto
C1E Support.................. = [Disabled]
Hardware Prefetcher.......... = [Enabled]
Adjacent Cache Line Prefetch. = [Enabled]
Intel(r) Virtualization Tech. = [Disabled]
CPU TM Function.............. = [Disabled]
Execute Disable Bit.......... = [Enabled]
Intel(r) HT Technology....... = [Enabled]
Active Processor Cores....... = [All]
A20M......................... = [Disabled]
Intel(r) SpeedStep(tm) Tech.. = [Disabled]
Intel(r) C-STATE Tech........ = [Disabled]