I have reached to 3.6 GHz(Prime95 Stable)
My BIOS Settings for 3.6 GHz Stable are below:
Ai Overclock Tuner [Manual]
CPU Ratio Setting [Auto]
FSB Frequency [400]
FSB Strap to North Bridge [Auto]
PCIE Frequency [100]
DRAM Frequency [DDR2-800 MHz]
DRAM Command Rate [2T]
DRAM Timing Control [Manual]
CAS# Latency [4 DRAM clocks]
RAS# to CAS# Delay [4 DRAM Clocks]
RAS# Precharge [4 DRAM Clocks]
RAS# Active Time [12 DRAM Clocks]
RAS# to RAS# Delay [AUTO]
Row Refresh Cycle Time [AUTO]
Write Recovery Time [AUTO]
Read to Precharge Time [AUTO]
Read to Write Delay(S/D) [AUTO]
Write to Read Delay (S) [AUTO]
Write to Read Delay (D) [AUTO]
Read to Read Delay (S) [AUTO]
Read to Read Delay (D) [AUTO]
Write to Write Delay (S) [AUTO]
Write to Write Delay (D) [AUTO]
DRAM Static Read Control [AUTO]
Ai Clock Twister [Moderate]
Transaction Booster [AUTO]
CPU Voltage [1.27500V]
CPU PLL Voltage [AUTO]
North Bridge Voltage [AUTO]
DRAM Voltage [1.80V]
FSB Termination Voltage [AUTO]
South Bridge Voltage [AUTO]
Loadline Calibration [AUTO]
CPU GTL Reference [AUTO]
North Bridge GTL Reference [AUTO]
DDR2 Channel A REF Voltage [AUTO]
DDR2 Channel B REF Voltage
My BIOS Settings for 3.6 GHz Stable are below:
Ai Overclock Tuner [Manual]
CPU Ratio Setting [Auto]
FSB Frequency [400]
FSB Strap to North Bridge [Auto]
PCIE Frequency [100]
DRAM Frequency [DDR2-800 MHz]
DRAM Command Rate [2T]
DRAM Timing Control [Manual]
CAS# Latency [4 DRAM clocks]
RAS# to CAS# Delay [4 DRAM Clocks]
RAS# Precharge [4 DRAM Clocks]
RAS# Active Time [12 DRAM Clocks]
RAS# to RAS# Delay [AUTO]
Row Refresh Cycle Time [AUTO]
Write Recovery Time [AUTO]
Read to Precharge Time [AUTO]
Read to Write Delay(S/D) [AUTO]
Write to Read Delay (S) [AUTO]
Write to Read Delay (D) [AUTO]
Read to Read Delay (S) [AUTO]
Read to Read Delay (D) [AUTO]
Write to Write Delay (S) [AUTO]
Write to Write Delay (D) [AUTO]
DRAM Static Read Control [AUTO]
Ai Clock Twister [Moderate]
Transaction Booster [AUTO]
CPU Voltage [1.27500V]
CPU PLL Voltage [AUTO]
North Bridge Voltage [AUTO]
DRAM Voltage [1.80V]
FSB Termination Voltage [AUTO]
South Bridge Voltage [AUTO]
Loadline Calibration [AUTO]
CPU GTL Reference [AUTO]
North Bridge GTL Reference [AUTO]
DDR2 Channel A REF Voltage [AUTO]
DDR2 Channel B REF Voltage