[SOLVED] help, my pc isnt booting, no post screen.

[Natrium]

I dont know in which category to place this in but anyways. I recently built my computer, and when i turned it on, the cpu fan started, all the rgb started, but the case fans didnt spin at all, CMOS lights red on VGA, DRAM, CPU, BOOT. No post screen or anything.

 

[Fix_that_Glitch]

System specs? Double check all your power connections, from source and to board to start with.

 

[Natrium]

System specs? Double check all your power connections, from source and to board to start with.

CPU: Ryzen 2600
GPU: RTX 2060 6GB Z Gaming
Ram: Vengeance Pro 2x8 gb 3200mhz rgb
PSU: Corsair 650 watt semi modular bronze rated
Cooler: Arctic Freezer 34
Mobo: B450 Aorus Pro
Case: NZXT H500
HDD: Seagate barracuda 1TB
SSD: Kingston A400 240GB

I've checked everything ill do it again for you, just try to push on everything right?

 

[Fix_that_Glitch]

CPU: Ryzen 2600
GPU: RTX 2060 6GB Z Gaming
Ram: Vengeance Pro 2x8 gb 3200mhz rgb
PSU: Corsair 650 watt semi modular bronze rated
Cooler: Arctic Freezer 34
Mobo: B450 Aorus Pro
Case: NZXT H500
HDD: Seagate barracuda 1TB
SSD: Kingston A400 240GB

I've checked everything ill do it again for you, just try to push on everything right?

I would pull out and reseat that way you know it has been double checked.

 

[Fix_that_Glitch]

After that try loosening the cooler screws, sometimes if you crank down on the screws the cooler plate scrunches the cpu pins down too much that could cause a short. Then there is no cross check and the computer does nothing.

 

[Natrium]

After that try loosening the cooler screws, sometimes if you crank down on the screws the cooler plate scrunches the cpu pins down too much that could cause a short. Then there is no cross check and the computer does nothing.

It just posted, I screwed them down until They got hard i didnt force anything.

 

[Fix_that_Glitch]

It just posted, I screwed them down until They got hard i didnt force anything.

Sorry what happened?

 

[Natrium]

Sorry what happened?

It just posted and asked me to boot something and restart, basically to install windows. Maybe my side panel pushed my cabels in too hard? The CMOS still lights up red on all 4 of the things and my case fans are not spinning.

 

[Fix_that_Glitch]

Can you get into bios now?

 

[Fix_that_Glitch]

It just posted and asked me to boot something and restart, basically to install windows. Maybe my side panel pushed my cabels in too hard? The CMOS still lights up red on all 4 of the things and my case fans are not spinning.

did you loosen the screws on the cooler?

 

[Natrium]

did you loosen the screws on the cooler?

No No i just tried booting it without my side panel on

 

[Fix_that_Glitch]

No No i just tried booting it without my side panel on

can you get into bios now?

 

[Natrium]

can you get into bios now?

Im there right now

 

[Fix_that_Glitch]

ok good so hopefully you can load windows and it will work for you.

 

[Natrium]

ok good so hopefully you can load windows and it will work for you.

Yes but my fans doesnt work? Only my cpu fan

 

[Fix_that_Glitch]

Yeah I think once you load the drivers your fans should work, check in you bios see if you can set them to auto maybe they will turn on.

 

[Natrium]

Yeah I think once you load the drivers your fans should work, check in you bios see if you can set them to auto maybe they will turn on.

I tried checking bios it just says 0 RPM and Nothing works.

 

[Fix_that_Glitch]

Can you find a setting to enable smart fan?

 

[Natrium]

Can you find a setting to enable smart fan?

I think it already is enabled.

 

[Fix_that_Glitch]

Did you get it working?