Help, my pc will boot and windows logo shows, but after loading the screen goes black.

[diolusion]

Ive been having this problem the last couple of days, when i turn the pc on, it boots through to windows logo and after the spinning icon the screen goes black, at this stage i should be greeted by the login screen. I went into safe mode and the computer works using the onboard graphics so im wondering if this is a problem with the graphics card, after a quick look on the internet, i came across an article that someone got the 'best answer' where he stated it could be a problem with the mobo, please help, this problem only happened after the latest windows update and i believe it may be something to do with the windows update drivers for my gpu.

My system specs are:
FX-8350 Unlocked (clocked to 4.2GHz)
GTX 760
Asus M5A97 Evo Motherboard
4x4gb Corsair XMS3 ram
240gb SSD + 1TB HDD
CX750M PSU

If anyone can help please do! Thank you for reading.

 

[CountMike]

Must be driver problem. In rare cases 3D part of a GPU would stop working. In Safe mode drivers are limited and only in 2D mode.
Try uninstalling GPU drivers in safe mode with http://www.guru3d.com/files-details/display-driver-uninstaller-download.html
For next normal BOOT windows should install some compatible driver.

 

[diolusion]

Hi, i tried doing this numerous times, the pc will boot in normal mode when i reset drivers, but then when i load up unigine heaven after letting windows update the drivers, the pc almost instantly crashes and goes back into the loop where i cannot boot off normal mode and have to go into safe mode, im starting to think this is a problem with the psu not getting enough power to the graphics card or maybe the gpu is shot.