Help needed in configuring a Router (TP LINK TD-W8968)

ravi garg

Reputable
Apr 2, 2015
2
0
4,510
Hi all,

I want to set up wifi. The internet source is local cabel broadband.

The Router I have is TP LINK TD-W8968

Problem: The local cable wala broadband has a RJ45 cable

What I did is that, I connect the LAN Cable from that device to the tp-link router and connected the router to power. I tried to configure it myself. I select the router mode (in router settings) and give my username and password they give me there and saved all setting and restarted.

But the problem is that, Wi-Fi gets connected but I can't browse internet. The connection stays Limited on my PC nor I can't browse any pages on my phone.

Do I have to do anything else? :??: Please guide

Regards.
 




Hi ,

Thanks for replying,

My router has WAN/LAN port . I have done some research on this and it is possible to connect cable broadband. Also, while purchasing this model the sales guy told me that it support the cable broadband (he aint know how to configure it).
The problem lies that I can connect the wifi from it, but I am not able to surf the net from my mobile (ie mobile is connecting to the wifi but net is unavailable).

Therefore I do not know whether router need to be configure or mobile need to be configure !!!!
 
I have the same router and it works with the Broadband cable connection....

U call the guy from the broadband company and he will configure the router (Router will be configure with the WAN IP Address of the broadband company)

and no need to configure your mobile...
 


 
Hi ravi..its very simple i had same router and i had siti cable connection with rj45.I did following steps
1.Firstly reset your router to factory mode by pressing reset button and then delete every previous network settings from pc.
2.Now insert your LAN cable in router and in CPU back side, remember do not insert WAN cable of operator in router now.
3.now open Browser and type 192.168.1.1 ,this will take you to tplink web page.Type admin in id and in password.
4.now click on operation mode button in left side than select wireless router mode out of three modes.
5.than choose static ip in place of dynamic ip.Now type your ip address,subnet mask,default gateway and DNS servers gien to you by your local operator'than save and exit .
6.Now turn off router completly and insert your rj45 wan cable in wan port and power on router and it will work.BESt of luck it worked for me
 
how to configure w8968 modem for railwire express network. It is an optical fiber connection. The output of the fiber connection is rj45 cable thru OLE unit. pls help me out
 
Hi All,

Thanks srejalan27, for providing the information to configure this router using Static IP address,
Can you please provide the information to configure this router using Dynamic IP address. (I have RJ45 Broadband Cable)

Vivek
 

TRENDING THREADS