[SOLVED] HELP!!! No display after Ram upgrade

[LyncIOO]

I recently installed 2x4 gb ddr3 1600 mhz sticks in my ECS G41T-M6V3.0, no display, even tough i resetted or cleared my cmos/BIOS

(I put back my 2x2 gb sticks so i can use my com. But i need 2x4 or 8gb for gaming, pls help)

 

[scallumal]

Please send your pc specs

 

[Nuwan Fernando]

What is your CPU? it seems your RAMs (Higher) don't support the speed which CPU needs(Lower).

 

[Calvin7]

Support DDR3 1333/1066/800 SDRAM

ECS ELITEGROUP

Founded in 1987, ECS, the Elitegroup Computer Systems, is a top-notch manufacturer and supplier of several families of computer products in the industry. With almost 30 years of experience, ECS not only produces high-quality products such as motherboards, desktops PC, notebook , Mini PC and semi...

www.ecs.com.tw

G41 Chipset motherboards use low-density memory. Most memory manufacturers have discontinued making that kind of memory years ago.

2x 4GB DDR3 1066MHz PC3-8500 DESKTOP Memory Non ECC 1066 Low Density
https://www.ebay.com/itm/8GB-2x-4GB...Non-ECC-1066-Low-Density-RAM-8G-/331724485983

 

[86zx]

Could be a bad ram stick try them individually

 

[LyncIOO]

Please send your pc specs

Cpu: Intel Q9500 2.8Ghz
GPU: RX 560 - B
SSD: Transcend 128Gb
HDD: WD Blue 500gb
Ram:Unifosa 2x2gb 1333mhz

 

[LyncIOO]

Support DDR3 1333/1066/800 SDRAM

ECS ELITEGROUP

Founded in 1987, ECS, the Elitegroup Computer Systems, is a top-notch manufacturer and supplier of several families of computer products in the industry. With almost 30 years of experience, ECS not only produces high-quality products such as motherboards, desktops PC, notebook , Mini PC and semi...

www.ecs.com.tw

G41 Chipset motherboards use low-density memory. Most memory manufacturers have discontinued making that kind of memory years ago.

2x 4GB DDR3 1066MHz PC3-8500 DESKTOP Memory Non ECC 1066 Low Density
https://www.ebay.com/itm/8GB-2x-4GB...Non-ECC-1066-Low-Density-RAM-8G-/331724485983

Thx for the additional info.

 

[LyncIOO]

What is your CPU? it seems your RAMs (Higher) don't support the speed which CPU needs(Lower).

Intel Q9500 2.8Ghz

 

[LyncIOO]

Could be a bad ram stick try them individually

Tried them one at a time, still nothin.

 

[scallumal]

Intel Q9500 2.8Ghz

Your motherboard and CPU doesn't support 1600mhz ram try and replace it

 

[Nuwan Fernando]

See whether you can start the computer with one stick of 2GB RAM and a 4G RAM. If so, you should be able to manually set the RAM bus speed to 667MHz from BIOS and then try the 2 X 4GB on them.

But if this is the case, If you reset the BIOS, you'll need that old RAMs to configure the BIOS again.