Hello, i would like to overclock my cpu to 4.2ghz but I don’t have much experience on this platform.
My hardware is:
Asus Strix Helios
Asus Strix B450-E
AMD Ryzen 7 2700X cooled By Asus Strix LC 360
Can someone help me?
I tried changing the following settings:
Ai Overclock Tuner = Manual
BCLK Frequency = 100.0000
Cpu Core Ratio 42.00
Core Performance Boost = Disabled
CPU Core Voltage = Offset Mode
CPU Offset Mode Sign = +
CPU Core Voltage Offset = 0.156 actually
CPU LLC = Regular
Global C-State Control = Enabled
I haven't changed any other setting other than these ( except RAM frequency/timing/voltage ).
I can get stable using cinebench R20 launched many times in sequence, using 3dmarks and playing some games. When I stop playing or benching with 3dmark ( and therefore slightly higher starting temperatures ) and i go launch cinebench r20, a few seconds and the pc is crashing.
I also noticed that when the cpu is in idle, the voltage does not drop, but only the frequency.
Can someone help me?
Thank you!
My hardware is:
Asus Strix Helios
Asus Strix B450-E
AMD Ryzen 7 2700X cooled By Asus Strix LC 360
Can someone help me?
I tried changing the following settings:
Ai Overclock Tuner = Manual
BCLK Frequency = 100.0000
Cpu Core Ratio 42.00
Core Performance Boost = Disabled
CPU Core Voltage = Offset Mode
CPU Offset Mode Sign = +
CPU Core Voltage Offset = 0.156 actually
CPU LLC = Regular
Global C-State Control = Enabled
I haven't changed any other setting other than these ( except RAM frequency/timing/voltage ).
I can get stable using cinebench R20 launched many times in sequence, using 3dmarks and playing some games. When I stop playing or benching with 3dmark ( and therefore slightly higher starting temperatures ) and i go launch cinebench r20, a few seconds and the pc is crashing.
I also noticed that when the cpu is in idle, the voltage does not drop, but only the frequency.
Can someone help me?
Thank you!
Last edited: