[SOLVED] Help OC with diferent ram's sticks 2666 and 3200 ( stuck at 2133)

[KenshiroHnK]

So thing is im trying to at least reach 2666 with both cards also tried to 2933, 3200, 3000. Any change i make on bios wont post, restarts 4 times and resets to 2133
What i did: frim gigabyte bios latest version al drivers updated. Tried first using xmp, then manualy changing volts to 1.35 1.3 1.36 and 1.4 and soc adding +252 so it gets 1.2v (base 0.8x) nothing worked also tried oc cpu base 3.2 to 3.8 and it worked.
note: rams are in chanel 2 and 4 ( and im trying to sell adata one so i can buy another gskill to fit)

PC
ryzen 7 2700
ax370 gaming k5
vega 64 asus strix
hdd wd black 2tb
nzxt 700w
Ram: 1 Gskill trident z rgb 8gb 3200mhz + 1 adata d40 xpectrix 8gb 2666mhz

 

[jimmysmitty]

The odds of getting them to match are going to be very difficult. They are completely different manufacture using different memory chips and timings. XMP wont work because of that. Your best bet is going to be trying to set the frequency and voltage and timings but it will take some trial and error to try and get them to both be happy with the timings.

 

[scout_03]

this adata specs http://www.xpg.com/en/specification/482 then the other https://www.gskill.com/en/finder?ca...op_6=0&prop_3=0&prop_4=0&prop_1=0&series=2860 they use same timings and not the same jedec speed settings also adata is 1.2 v and g-skill 1.35 v so they wont work toghether get yourself a dual channel set on your board qvl list or been tested for it by ram maker .