Help OCing RAM

[MattC231]

Hi, I'd like to OC my 4 Kingston HyperX FURY 8GB 1600MHz DDR3 CL10. Can somebody help me as I'm new to OCing?

Also if you need to know my setup to help ask and I'll add it.

 

[Lutfij]

These are your system specs:
http://valid.x86.fr/2l7tg8

Have go through these:
http://www.tomshardware.com/forum/254402-29-memory-overclocking-guide-links
http://www.tomshardware.com/forum/id-2450639/overclocking-cpus-memory-controller-effect-raised-multiplier-cpu-overclock.html

I could ask you to key in the desired frequency then up the voltage and tinker with the timings but you're going to have to understand that with all ram slots populated it's going to add more stress to your memory controller thus your results will vary accordingly.

Hope this helps!
😉

 

[Tradesman1]

What mobo and CPU? If we know that can offer some suggestions. Also the model number of the Fury?

 

[MattC231]

Have go through these:
http://www.tomshardware.com/forum/254402-29-memory-overclocking-guide-links
http://www.tomshardware.com/forum/id-2450639/overclocking-cpus-memory-controller-effect-raised-multiplier-cpu-overclock.html

I could ask you to key in the desired frequency then up the voltage and tinker with the timings but you're going to have to understand that with all ram slots populated it's going to add more stress to your memory controller thus your results will vary accordingly.

Hope this helps!
😉

thanks for reply and help

 

[MattC231]

What mobo and CPU? If we know that can offer some suggestions. Also the model number of the Fury?

click on the banner below

 

[Tradesman1]

2 sets of 2x8GB then, might initially try with the DRAM at 1.56 1866 11-11-11-30, if that works could try 10-11-11-30

 

[MattC231]

2 sets of 2x8GB then, might initially try with the DRAM at 1.56 1866 11-11-11-30, if that works could try 10-11-11-30

ok thanks, will try

 

[Tradesman1]

Let us know how it goes 😉