Help on overclocking AMD 4000+ San Diego

[johnjailbait]

Ok I am doing my grad project on how overclocking will change the fps of a game and have a pretty nice system but not to smart on overclocking. It runs at 2.4Ghz and i have the new zalman 9500 Heatsink on it so heat is not a problem. But i need settings for the multiplyer and so on to have it at a 5% 10% and then max stable cpu increase. With the gigabyte software i have it can go up to 11% then it reboots but not due to temp its the settigns that are wrong on it. All i have to do is click on an arrow and the Clock will go up or down. But i need acual settings to get my cpu speed the most stable with best performance fps wise.

Thanks hope someone can help me

 

[sirheck]

it is better to go in the bios to overclock also memory makes a big
diff on overclocking my brother has an amd 3500 clawhammer 939
with 2 sticks of corsair value selct and i could only get his to 2310mhz
stock is 2200 i put my xms of the same ram and got 2507mhz and they were about 20 dollars more than the value select. also i have never had
any luck dropping the multiplier i always keep mine at x11 i had a msi
k8 neo4 sli with the 3700 sandy core and had it to 2507mhz with no
voltage bump for three months before the mobo gave up the ghost
but i had problems with that mobo from day one i now have the asus 32sli
deluxe with the same 3700 and 4 xms 512s and it is at 2608mhz with the multiplier at x11 and a slight voltage bump when i first tried the asus overclock tool it would drop the multiplier i had to go to bios to lock the multiplier at x11 i am not sure about the gigabyte but any way i overclock through the bios only

 

[johnjailbait]

You sure i need new ram tho

 

[sirheck]

just give it atry go to the bios and lock the multiplier and start from stock
go up a little at at time and check stability

 

[illicitsc]

ocing takese patience.. my 800mhz oc took a month to burn in

 

[johnjailbait]

dont really know what all to change. Shouldnt i be fine with 4 sticks of corsair 256mb pc 3200. I just need someone elses numbers and results so i know what to change and how much. There any good overclocking software or should i just stick to overclocking in the bios. What other good programs are there for overclockers i have cpucool cpu-z just wondering if there were any other cool ones

 

[illicitsc]

4 sticks puts strain o nthe mem controller. try em at 1t but if it dont work , sell em and get 2x512. adn btw dont make drastic changes to the bios. comps dont like that. do htt change then boot. then mess witht ram. if u do both at once u might get a bsod

 

[illicitsc]

4 sticks puts strain o nthe mem controller. try em at 1t but if it dont work , sell em and get 2x512. adn btw dont make drastic changes to the bios. comps dont like that. do htt change then boot. then mess witht ram. if u do both at once u might get a bsod

 

[johnjailbait]

So you think i will be good with 2 sticks of 512 corsair xms?
some newb questions here what is 1t why not make drastic changes to the bios you saying i should gradually push it ? What is htt. What is bsod.

Oh and i found something and this guy got his 4000+ to 2.75 and a few others to 2.85 i think these are the calculations

Drop ram from 400 down to 333
Drop multiplier from 12x down to 11x
Increase HTT to 250
Increase CPU voltage a bit
Increase Ram Voltage to 2.7
Lock PCI bus at 33
That other option with 5x... DRop that down to 4x 2.75Ghz