HELP. Overclock doesn't stay at 4.4 ghz amd fx6300

[sorax207]

I have an amd fx6300 overclocked to 4.4ghz. The problem i have is that the cpu speed fluctuates between 4.4 ghz to 4.36 ghz it mostly stays around 4.399 ghz. I have also disabled CPU smart protection,AMD turbo technology and cool and quiet. Is there any way i can keep it at a constant 4.4 ghz where it doesn't go down

http://i.imgur.com/RnIiD6S.png

My mother board is a MSI 970 gaming
Cooler: Noctua nh u12s.

 

[lazyboy947]

try to manually set the base clock or front side bus to 200. Also 4.36/4.399 isnt going to show a performance drop from 4.4ghz. It is most likely a frequency that isnt constant. But if it stays above 4.3 ish ghz there shouldnt be a problem. Based off the screenshot it is the base clock that is at 199.99, in the bios it is probably set for 200 or auto but i dont think it can be change to be surely at 200. bus speed or fsb x multiplier gets the clock speed

 

[CountMike]

They fluctuate a bit most of the time, voltages are always fluctuating a bit and so does processor frequency.

 

[lessthan0]

You won't hit 4.4 Ghz exactly. You'll might end up 2 or 3 Mhz less. If you are using task manager on windows 8 or 10, it's not exactly known for accuracy. Voltages are supposed to fluctuate. Your CPU isn't going to work at 100% all the time. If you are scared about the voltages fluctuating, you can put the voltage in override mode.

 

[CountMike]

My 6350 fluctuates between 4731 and 4732 all the time despite everything set to manual.

 

[Matt_matrix]

My 6350 fluctuates between 4731 and 4732 all the time despite everything set to manual.

just curious; as ive been trying to reach roughly the same clock with little luck; what are you're voltages? if it wouldn't be too much trouble for you too list them...

 

[CountMike]

CPU VID = 1.325v
NB VID = 1.1625v
SB Core = 1.2v
Memory Core = 1.5v
NB Core = 1.150v
Keep in mind that this is FX 6350 BE with stepping C0 and MB has 140W rating.