So my PC that I've build has been working fine for the past 2 years but since yesterday its been giving me an extremely hard time but I have a glimpse of hope. First of all I'd like to apologise if this post takes a fair bit of time but all local PC shops are closed due to corona. So at the start of the day the problem I was dealing with was error "0xc000000e . My system currently features AB350 GAMING k4 motherboard with and amd ryzen 1600x cpu and a gtx1080 gpu. I'm using 4 sticks or RAM 4gb each G.skill Ripjaws and furthermore I have 2 ssds and 1hdd. My psu is a EVGA 600W . So I started by getting windows on a USB in case i needed a fresh install since it wouldn't let me past bios. But before I even got to reinstalling, my PC was now randomly shutting down as if there was a power shortage or something and this would happen within 10-20 secs of me booting so I was worried and thought it may be a psu issue. I opened up the case did some unplugging work with my data storage units and now It wasn't just shutting down but it would also restart so I was in a boot loop. I looked online at possible causes and solutions and tested them systemically. First I removed my RAM and put it back on, no luck, however I am aware it most likely isn't a RAM issue as earlier when I was able to access the bios it would show me all 4 sticks of ram there as functioning. Anyhow I went and physically reinstalled my gpu and RAM but this time I only put 2 of the 4 sticks and prior to rebooting this time I did a manual BIOS reset via the jumper on my motherboard and here is where the real puzzle begins. Now hear this folks at this point I had gone thought at least 4-5 hours of trail and error trying to get to my BIOS settings and here we go at this point I am currently at a stage where although it feels like I am stuck on the asrock logo (I made it out of the loop with 2 sticks of ram and actually weirdly my motherboard would only recognise one) after a good 10 to 15 minutes my pc would get me into the bios which gave me some hope but left me puzzled. Now even weirder is that if I do this process of waiting 10 mins but I DO NOT press f2 or delete if takes me to a windows installation setup. But now when I try to install windows it shows me no driver and says windows cannot be installed in this driver ( driver 0, 0 gb)