HELP! Watercool fittings problem!

[KeeganMcc]

So, let me get started. I'm working on a project with a full water cool loop inside, i've been looking around and i've found the perfect rads I want. When I say rads I mean i'll be running a loop with 2 different sized radiators, a Alphacool NexXxoS UT60 Full Copper 480mm and a Alphacool NexXxoS UT60 Full Copper 360mm. I want the CPU, MOBO and GPU/s to be cooled. My only problem is I want to stick to a colour scheme of white, I know the bitspower fittings come in white so i'm leaning on going towards those. I don't want to use soft tubing as i've had many problems with that in the past, I'm going to use rigid tubing.

Now that's clear here is my problem, I don't know what fittings to use for the loop. And if anyone could suggest a good pump, not pump and res combo that'll be great. Keep in mind this build is huge, i'm building my PC into a desk.

Thanks guys!

 

[Lutfij]

You seem to confused with the fittings dimensions out of anything here. Have you read through the watercooling sticky(linked in my sig)? The fittings found off of Bitspower's site are pretty much straight forward and the tubing's can also be sourced from them. You can look at 12mm fittings while the largest is 16mm.

Are you sure you can't settle on EK or Primochill fittings and their corresponding tubing? Might you want to share your system specs and watercooling purchase list to make sure you haven't overlooked anything?