Help with ASUS Z170A Motherboard

[chris_293]

I guys i am new at building computer and i have ASUS Z170A Motherboard and i turn my computer on and there is red light on BOOT DEVICE LED and i cant fix it help. i have only two ram stick so i put 2 and 4 all the fans are working i only have hdd and i put the cord to the STA6G_6

 

[alexoiu]

What CPU and graphics card using?

 

[chris_293]

What CPU and graphics card using?

Intel Core i5 6600K 3.50 GHz Graphic is
ASUS Graphics Cards TURBO-GTX970-OC-4GD5

 

[alexoiu]

Is the monitor connected to the card and not to-the motherboard?

 

[chris_293]

Is the monitor connected to the card and not to-the motherboard?

Ops i click the wrong button the monitor is connect to the mother board should i connect to Graphic card?

 

[alexoiu]

Yes, connect the monitor to the card.

 

[chris_293]

Yes, connect the monitor to the card.

ok when i trun on it said cup fan speed error detected ensure that the cpu fan is properly installed on the cpu fan header or adjust/disable the fan speed low limit option the uefi bios

well my Cpu fan is properly installed.

 

[alexoiu]

Check in BIOS (Monitor Menu) and set the CPU fan low speed to 200.

 

[chris_293]

Check in BIOS (Monitor Menu) and set the CPU fan low speed to 200.

err i am at the BIOS monitor menu but idk how to change the CPU FAN speed there is no drop down. only N/As and tempeatures.

 

[alexoiu]

There is a cursor on the right side. Have you scrolled down?

 

[chris_293]

There is a cursor on the right side. Have you scrolled down?

so go to CPU QFAN Tuning? the CPU FAN SPEED LOWER LIMIT is the 200 RPM
or do i go to CPU FAN Profile and do Manual setting then change it to 200?

 

[alexoiu]

If CPU FAN SPEED LOWER LIMIT is set to 200 and still getting the error, try setting it to Ignore. What cooler using and how have you connected the fans/pump to the motherboard?

 

[chris_293]

If CPU FAN SPEED LOWER LIMIT is set to 200 and still getting the error, try setting it to Ignore. What cooler using and how have you connected the fans/pump to the motherboard?

i got a NZXT Kraken X61 280mm All-in-One Liquid Cooling System RL-KRX61-01 and it is connected to CPU FAN

 

[alexoiu]

Both fans and pump?

 

[chris_293]

Both fans and pump?

YES

 

[alexoiu]

Still getting the error if BIOS setting set to Ignore?

 

[chris_293]

Still getting the error if BIOS setting set to Ignore?

nono after doing that every time i turn on the computer it goes to Bios Utility .is that means it is fixed?

 

[alexoiu]

Can you connect the fans to the CPU_Fan and CPU_Opt headers and the pump to a case fan header and test again?

 

[chris_293]

Can you connect the fans to the CPU_Fan and CPU_Opt headers and the pump to a case fan header and test again?

OK it worked Grate.. the fans i didnt put it on to CPU fan i just put it in on extra extend cords. and i put it in to CPU Fan and no erros thanks

 

[alexoiu]

You're welcome.