[SOLVED] Help with Corsair SPEC-DELTA RGB Fans

Apr 2, 2021
3
0
10
I am using a B450M Pro VDH MAX motherboard and the SPEC-DELTA comes with 3 120mm RGB fans along with a single 120mm non-RGB fan. My motherboard comes with two SYS_FAN connectors and one JRBG1 connector. Do the RGB fans of the SPEC-DELTA come with a splitter so that I can connect them all to the JRGB1 connector?

P.S. I know I will need a separate splitter for SYS_FAN so that I can get them all to spin.
 
Solution
if they came with the case, there should be an RGB hub to connect them to behind the motherboard.
if it didn't come with one you would need to purchase one.
either aRGB(3-pin) or RGB(4-pin) depending on the type the fans use.
I will need a separate splitter for SYS_FAN so that I can get them all to spin.
you should be able to find a hub that supports both fans and RGB, Corsair has a few available.

Do the RGB fans of the SPEC-DELTA come with a splitter so that I can connect them all to the JRGB1 connector?
is your jRGB header 3-pin? if so, you cannot connect 4-pin RGB cables to it.
if they came with the case, there should be an RGB hub to connect them to behind the motherboard.
if it didn't come with one you would need to purchase one.
either aRGB(3-pin) or RGB(4-pin) depending on the type the fans use.
I will need a separate splitter for SYS_FAN so that I can get them all to spin.
you should be able to find a hub that supports both fans and RGB, Corsair has a few available.

Do the RGB fans of the SPEC-DELTA come with a splitter so that I can connect them all to the JRGB1 connector?
is your jRGB header 3-pin? if so, you cannot connect 4-pin RGB cables to it.
 
Solution
if they came with the case, there should be an RGB hub to connect them to behind the motherboard.
if it didn't come with one you would need to purchase one.
either aRGB(3-pin) or RGB(4-pin) depending on the type the fans use.
you should be able to find a hub that supports both fans and RGB, Corsair has a few available.


is your jRGB header 3-pin? if so, you cannot connect 4-pin RGB cables to it.
The JRGB header is 4 pin as shown in the manual. Is there an actual splitter in which I can connect the RGB connectors of the 3 fans to the single JRGB header?