Help with led stripes

May 20, 2018
2
0
10
HI,
recently I bought 2 led strips of 25 cm each connected via molex but I am a bit disappointed, when the computer turn on they have a high brightness but a second later it decreases, should I leave 1 cable of the PSU only for the led strips?

You can se the problem here:  http://

Specs: 
MOBO Gigabyte z170x gaming 3
CPU Interl i5 6600k  - hyper 212 evo
Ram 2x4 gb ddr4 2400 mhz
GPU gtx 1070 gaming g1 gigabyte 
SSD 120gb sandisk 
HDD 2 tb 7200rpm hitachi 
PSU EVGA 700w 80+ bronze 

Thanks 
 


it does not have instructions, nor controller nor the option of configuration, it is simply the LED strip, the cables and the molex connector that goes directly to the psu, not to the motherboard

like this: http://

the seller tried it before selling it and it had a high brightness like the initial brightness when I start up my pc
 
Ask the seller how his system was set up and configured for the LED strips.

And ask about the details of his system. Hardware, software, application being use (if any).

The initial brightness may just be much like a light bulb when first turned on. Bright and then dims.

Your system may be okay and working correctly.

He may have done something to make the LED's appear brighter - at the eventual risk of damage to his system.

Sellers do all sorts of things to enhance the appearance and performance of products.....