Hey scottchen

[SJJM]

Well I finally got my stuff, but I have ran into a problem. The northbrige runs way to hot. I can't get passed 240fsb. I was wondering if you know of any mods to keep the chipset cooler, I was thinking about getting an old hs. Well ideas would be great.

<font color=blue>"You know, that my backstab attack does double the damage. I can make an off button for him." </font color=blue> 😎

 

[scottchen]

Check out the Swiftech MCX149 or whatever it's called, their new chipset coolers, those tings are top of the line. Or just simply get a Thermaltake Tiger Chipset cooler that's what i used it could handle 320FSB no problem.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/780 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[SJJM]

Thanks, I think I am going to get the tigerchipset cooler, unless I can find a water chipset cooler for this board.

<font color=blue>"You know, that my backstab attack does double the damage. I can make an off button for him." </font color=blue> 😎

 

[scottchen]

Tiger's great.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/780 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[SJJM]

Well right now I just did something different. I got a 370 hs and fan and modded it to fit my chipset. So far it is working great I am now at 1000fsb and I am looking to go higher.

<font color=blue>"You know, that my backstab attack does double the damage. I can make an off button for him." </font color=blue> 😎

 

[scottchen]

Well of course go higher because the stock can handle 250FSB

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/780 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[SJJM]

Right now I am stuck at 255. I think I am going to get a better hs for it.
What core vlt are you using to hit 3.5g. I don't know if my cpu can go over 3.2g, my temps are under 40c and it lock or restart when I try to go higher. Do you have mam on? Well it does not look to good right now for me.

<font color=blue>"You know, that my backstab attack does double the damage. I can make an off button for him." </font color=blue> 😎

 

[scottchen]

Pump voltage up to 1.65 have you done that? make sure the Dram ratio's at 3:2 when you first overclock. That way you limit then ram's problem, then see how much FSB you could get out of your mobo.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/780 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[SJJM]

Is 1.65 kinda high for an asus board. I believe that would be running like 1.69 or so. I thought that p4 could die if they have to high of voltage.

<font color=blue>"You know, that my backstab attack does double the damage. I can make an off button for him." </font color=blue> 😎

 

[scottchen]

don't worry i set mine at 1.65 it never went above 1.67, and P4 doesn't really like 1.7 so try to stay under 1.7V, just make sure your CPU is cool.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/780 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[SJJM]

I know it is really cool. under full load it only hits 44c. Tomorrow I will try to get 3.5g I hope I can.

<font color=blue>"You know, that my backstab attack does double the damage. I can make an off button for him." </font color=blue> 😎