Hi I'm sort of new and I needed help if this was right..

[toiletninja]

Hi, I'm kind of new to setting the bios and memory and of those stuff and I needed to make sure I was doing this right.

My motherboard is p5n-e sli,

and this is my ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820146677

(2 sticks each 1 gb)

I saw that the timings for this ram was 5-5-4-12 so I set it up this way: http://img204.imageshack.us/img204/1755/memaa8.jpg in the bios

Is this correct?

Thank you

 

[badge]

You have the RAM set mfg. specs, for stabilization purposes you might set the memory voltage to mfg. specs too, 2.3 -2.35v.

 

[toiletninja]

Thanks, so the numbers in the picture are correct? I didn't change any voltage settings, and I have been running like this for a while with no problems.
I just want to make sure, I can just leave it like this right? becuase I don't want to cause any long term damage or anything.
Thanks again

 

[badge]

Download and install CPUZ and you can check your memory timings from windows.

http://www.cpuid.com/

Setting the timings will not cause damage to your RAM, board or otherwise. RAM timings could cause the system to fail to post. Your RAM has Mfg. voltage specifications too.

 

[toiletninja]

Thanks but I have one more question, do I HAVE to set the voltage? (will it cause any form of damage if I dont?) I don't want to go through the hassle of going into the bios and doing all that stuff.

 

[badge]

If your RAM says runs 5-5-4-12 at 2.2 to 2.35 volts, well that's the mfg specs. Apparently you are not experiencing system crashes, blue screens, shutdowns, etc. so your RAM is running at 5-5-4-12 with the RAM voltage at BIOS default.

 

[toiletninja]

So it's all right, right? (and no I don't experience bsod or crashes)
Thank you for helping me 😀 (you see I'm kind of paranoid about not causing any damage to this pc)

 

[badge]

Simply install CPUZ from the website I posted and you can check your memory timings from windows.

 

[toiletninja]

yeah I already had cpuz and I did check the timings and everything is good
thanks again