[SOLVED] High CPU idle temperature after reseting bios to default

[AlmirTZ]

Hello guys. Recently I bought used desktop and it had Masterliquid ml240L already installed. Everything worked fine until I didn't reset BIOS and now my idle temp is about 50 C and when cpu is at max, then temp jumps to 100 C, but it jumps in just few seconds, I mean very fast. So do you know maybe what I should change again in Bios, I tried everything that I was thinkinkg that will help, but nothing helps.
Motherboard is ASUS Prime 360m
CPU > I5-9400f
and I will attach few pictures so if anybody know what to change. Thanks
https://prnt.sc/t183qi

and here is picture when I just open DAZ Studio
https://prnt.sc/t1859z

 

[CountMike]

Hello guys. Recently I bought used desktop and it had Masterliquid ml240L already installed. Everything worked fine until I didn't reset BIOS and now my idle temp is about 50 C and when cpu is at max, then temp jumps to 100 C, but it jumps in just few seconds, I mean very fast. So do you know maybe what I should change again in Bios, I tried everything that I was thinkinkg that will help, but nothing helps.
Motherboard is ASUS Prime 360m
CPU > I5-9400f
and I will attach few pictures so if anybody know what to change. Thanks
https://prnt.sc/t183qi

and here is picture when I just open DAZ Studio
https://prnt.sc/t1859z

Check pump speed and set it to maximum.

 

[AlmirTZ]

I solved it. It turns out that I had to disable turbo mode for cpu in bios for some reason, and now temperature droped to 70 C on 100% load